Economical Solutions; Eco Solution; Changing The Picture Options; Advanced Settings - Samsung 6 series User Manual

¦

Economical Solutions

ECO Solution

Energy Saving (Off / Low / Medium / High / Picture Off /
■
t
Auto) : Adjust the brightness of the TV in order to
reduce power consumption. If you select Picture Off, the
screen is turned off, but the sound remains on. Press any
button except volume button to turn on the screen.
ECO Sensor (Off / On) : To enhance your power
■
savings; the picture settings will automatically adapt to
the light in the room.
✎
If you adjust the Backlight, the Eco Sensor will
be set to Off.
Min Backlight: When ECO sensor is On, the minimum
screen brightness can be adjusted manually.
✎
If Eco Sensor is On, the display brightness may
change (become slightly darker in most cases)
depending on the surrounding light intensity.
No-Signal Power Off (Off / 15 min / 30 min / 60 min)
■
Activates the Stand-by mode, in the case of "No Signal"
or "Check Signal Cable" status for a certain period of
time defined by the user.
✎
Disabled when the PC is in power saving mode.

Changing the Picture Options

¦

Advanced Settings

(available in Standard / Movie mode)
You can adjust the detailed setting for the screen including
colour and contrast.
✎
In PC mode, you can only make changes to
Contrast, Gamma and White Balance.
Advanced Settings
Black Tone
Dynamic Contrast
Shadow Detail
Gamma
Expert Pattern
RGB Only Mode
Colour Space
U Move E Enter R Return
Black Tone (Off / Dark / Darker / Darkest)
■
black level to adjust the screen depth.
Dynamic Contrast (Off / Low / Medium / High)
■
the screen contrast.
Shadow Detail (-2~+2) : Increase the brightness of dark
■
images.
✎
Disabled under PC mode.
Dynamic
: Off ►
: Medium
: 0
: 0
: Off
: Off
: Native
▼
: Select the
: Adjust
Gamma : Adjust the primary colour intensity.
■
Expert Pattern (Off / Pattern 1 / Pattern 2)
■
running the Expert Pattern function, the picture can be
calibrated without a generator or filter. If the OSD menu
disappears or a menu other than the Picture menu is
opened, the calibration is saved and the Expert Pattern
window disappears.
✎
While the Expert Pattern is running, sound is not
outputted.
✎
Only enabled in DTV, Component and HDMI modes.
RGB Only Mode (Off / Red / Green / Blue)
■
adjust Colour or Tint of Red, Green or Blue for the picture
from an external device (DVD player, home theatre, etc.).
Colour Space (Auto / Native / Custom)
■
Red, Green, Blue and Reset, set Colour Space to Custom.
White Balance : Adjust the colour temperature for a
■
more natural picture.
R-Offset / G-Offset / B-Offset: Adjust each colour's
(red, green, blue) darkness.
:
R-Gain / G-Gain / B-Gain: Adjust each colour's
(red, green, blue) brightness.
Reset: Resets the White Balance to it's default settings.
10p White Balance (Off / On)
■
balance in 10 point interval by adjusting the red, green,
and blue brightness.
✎
Available when the picture mode is set to
and when the external input is set to HDMI or
Component.
✎
Some external devices may not support this function.
Interval: Select interval to adjust.
Red: Adjust the red level.
Green: Adjust the green level.
Blue: Adjust the blue level.
Reset: Resets the 10p White Balance to its default settings.
: Emphasize pink "Flesh Tone".
Flesh Tone
■
Edge Enhancement (Off / On)
■
boundaries.
xvYCC (Off / On) : Setting the xvYCC mode on
■
increases detail and colour space when watching movies
from an external device (e.g. DVD player connected to
the HDMI or Component IN jacks.
✎
Available when the picture mode is set to
when the external input is set to HDMI or Component.
✎
Some external devices may not support this function.
: By
: You can
: To adjust Colour,
: Controls the white
Movie
: Emphasize object
Movie and
13
English