Table of Contents
Advertisement
4.
SPECIAL FEATURES
Tuner mode
You can also use your video recorder as a TV receiver (tuner).
1
Hold the
STOP h
button, until appears in the display.
2
Select the required programme number with the
button or with the
P q
3
Switch the video recorder to standby by pressing the
STANDBY m
button when you no longer want to watch
television.
Externally controlled recording
Do you have another device, e.g. a satellite receiver, which
can control other equipment by a 'programming' function? You
can connect this device to the video recorder with a scart
cable, at socket
.
EXT.2
1
Insert a cassette. Switch to standby with
the
button.
STANDBY m
2
Hold the
button until 'REC.P' appears in the
MONITOR
display.
3
If you want to interrupt this function before the recording
has actually started, hold the
'REC.P' disappears from the video recorder display.
4
If you want to interrupt this function while a recording is
being made, press the
STANDBY m
P r
buttons.
0-9
button until
MONITOR
button.
On Screen Display (OSD)
You can switch the On Screen Display (OSD) on or off.
1
Switch on the TV set. Press the
the video recorder.
or
2
With the
or
P q
the
button.
OK
3
With the
P q
button, select 'ON' or 'OFF'. Confirm with
the
button.
OK
Note: With the
button you can superimpose the actual
OK
operating mode on the TV screen.
Channel number or frequency display
You can switch between the display for 'channel number' or
'frequency' for manual channel search.
1
Press the
AUTOINSTALL
2
With the
or
P q
'CHANNEL/FREQUENCY'. Confirm with the
3
With the
P q
button. select 'CHANNEL' or 'FREQUENCY'.
Confirm with the
AUTOINSTALL
button, select 'OSD'. Confirm with
P r
button.
button, select
P r
OK
button.
OK
button on
button.
11
Hide quick links:
Advertisement
Table of Contents
