Listening through a Receiver (Home theater)
¦
You can listen to sound through a receiver instead of the TV speaker.
. Press the TOOLS button. Press the ENTERE button to select Anynet + (HDMI-CEC).
. Press the ▲ or ▼ button to select Receiver. Press the ◄ or ► button to select On or Off.
. Press the EXIT button to exit.
If your receiver supports audio only, it may not appear in the device list.
N
If there is a power interruption to the TV when the Receiver is set to On (by disconnecting the
N
power cord or a power failure), the Speaker Select may be set to External Speaker when you turn
the TV on again.
Troubleshooting for Anynet +
¦
Problem
Anynet + does not work.
I want to start Anynet + .
I want to exit Anynet + .
The message Connecting to
Anynet + device... appears on the
screen.
The Anynet + device does not
play.
The connected device is not
displayed.
The TV program cannot be
recorded.
Possible Solution
Check if the device is an Anynet + device. The Anynet + system supports Anynet +
●
devices only.
●
Connect only one receiver (home theater).
Check if the Anynet + device power cord is properly connected.
●
Check the Anynet + device's Video/Audio/HDMI 1.3 cable connections.
●
Check whether Anynet + (HDMI-CEC) is set to On in the Anynet + Configuração menu.
●
●
Check whether the TV remote control is in TV mode.
Check whether it is Anynet + exclusive remote control.
●
Anynet + doesn't work in certain situations. (Searching channels, Operating
●
Plug & Play, etc.)
●
When connecting or removing the HDMI 1.3 cable, please make sure to search devices
again or turn your TV off and on again.
Check if the Anynet + Function of Anynet + device is set on.
●
Check if the Anynet + device is properly connected to the TV and check if the
●
Anynet + (HDMI-CEC) is set to On in the Anynet + Configuração menu.
●
Press the TV button on the TV remote control to switch to TV. Then press the TOOLS
button to show the Anynet + menu and select a menu you want.
Select View TV in the Anynet + menu.
●
●
Press the SOURCE button on the TV remote control and select a device other than
Anynet + devices.
●
Press z and PRE-CH to change the TV mode. (Note that the channel button
operates only when a tuner-embedded Anynet + device is not connected.)
You cannot use the remote control when you are configuring Anynet + or switching to a
●
view mode.
Use the remote control when the Anynet + setting or switching to view mode is complete.
●
●
You cannot use the play function when Plug & Play is in progress.
Check whether or not the device supports Anynet + functions.
●
●
Check whether or not the HDMI 1.3 cable is properly connected.
Check whether Anynet + (HDMI-CEC) is set to On in the Anynet + Configuração menu.
●
Search Anynet + devices again.
●
You can connect an Anynet + device using the HDMI 1.3 cable only. Some Some HDMI
●
cables may not support Anynet+ functions.
●
If it is terminated by an abnormal situation such as disconnecting the HDMI cable or
power cord or a power failure, please repeat the device scan.
●
Check whether the antenna jack on the recording device is properly connected.
English -
TV
Air
View TV
Select Device
Record
Menu on Device
Device Operation
Receiver :Off
Configuração
U Move
E Enter
R Return