Connecting The Video Out To Your Tv - Samsung HT-D330K User Manual

Choose one of the two methods for connecting to a TV.
Red
SPEAKERS OUT
FRONT CENTER FRONT
AUX IN AUX IN
SURROUND SUBWOOFER SURROUND
ONLY DIGITAL DIGITAL
FOR SERVICE AUDIO IN AUDIO IN
SPEAKER IMPEDANCE : 3
METHOD 1 : Component (Progressive Scan) Video
If your television is equipped with Component Video inputs, connect a Component video cable (not supplied)
from the COMPONENT OUT (P
jacks on your TV.
METHOD 2 : Composite Video
Connect the supplied Video cable from the VIDEO OUT jack on the back of the product to the VIDEO IN jack
on your TV.
✎
NOTE
`
When the Progressive scan mode is selected, the VIDEO output does not feed any signals.
`
This product operates in Interlace scan mode 480i(576i) for component/composite output.
`
After making the video connection, set the Video input source on your TV to match the corresponding Video
output mode on your product.
Turn this product on fi rst before you set the video input source on your TV. See your TV owner's manual for
more information on how to select the TV's Video Input source.
!
CAUTION
`
Do not connect the unit through a VCR. Video signals fed through VCRs may be affected by copyright
protection systems and the picture will be distorted on the television.

Connecting the video Out to your Tv

Blue Green
COMPONENT OUT
FM ANT FM ANT
VIDEO OUT
METHOD 2 (supplied)
, P and Y) jacks on the back of the product to the Component Video Input
R B
METHOD 1
1
English