Installing The Speakers On The Tallboy Stand - Samsung HT-D553 User Manual

Installing the Speakers on the Tallboy Stand

* HT-D553 only - Front Speakers
* HT-D555 only - Front/Surround Speakers
1. Turn the Stand Base upside-down and connect it to the Stand.
2. Insert small screws (4*20, For connecting Stand & Stand Base) clockwise into
the four holes marked using a screwdriver as shown in the illustration.
!
CAUTION : When you use a torque screwdriver, be careful not to put
excessive force. Otherwise, it runs idle or can be damaged. (torque screw-
driver- below 15 kg.f.cm)
3. Connect the upper Speaker to the assembled Stand.
4. Insert another large screw (5*15, For connecting Speaker & Stand)
clockwise into the hole on the rear of the speaker using a screwdriver.
5. This is the appearance after the speaker is installed. Follow this steps
to install other speaker.
HT-D550-ZA-ENG-1228.indd 17 HT-D550-ZA-ENG-1228.indd 17
1
Stand
Base
Stand
2
3
Speaker
Stand
4
5
17
English
2011-12-29 2011-12-29 1:07:37 1:07:37