Honda 2010 Insight Owner's Manual page 376

6. Slide the wiper blade assembly
onto the wiper arm. Make sure it
locks in place.
7. Make sure the blade is completely
installed and that its edge is not
bunched up.
8. Lower the wiper arm down against
the windshield, the passenger's
side first, then the driver's side.
REAR
To replace a rear wiper blade:
1. Raise the wiper arm off the rear
window.
2010 Insight
Wiper Blades
2. Disconnect the blade assembly
from the wiper arm by pivoting the
blade assembly upward.
CONTINUED
373