Setting The Rf Out Channel - Philips VR740/02 User Manual

Setting the RF out channel

In some reception locations it is possible that a
TV channel will be sent on the same or similar
frequency as the video recorder.
Result: As soon as the video recorder is
switched on, the reception quality for this or sev-
eral other TV channels will decrease.
The following steps will show you how to change
the pre-set 'transmission' (RF out channel) fre-
quency on the video recorder.
What is RF out channel?
This electronic component in the video recorder
allows the device to transmit audio and video
signals via the aerial cable. These signals can
be received on a TV set just like TV channels.
This frequency or channel indicates the channel
on which the audio or video signal is transmit-
ted.
1.
1.
Switch on the TV. If required, select the pro-
gramme number for the video recorder.
2.
2.
Press . The main menu will appear.
MENU
3.
3. Select 'INITIAL SET UP' with
and confirm with
STOP C-L
4.
4.
Select 'RF OUT' with
confirm with
FWD 1- B
SELECT K L CHOOSE B
RF OUT CH
END=EXIT
5.
5. Press
FWD 1- B
6.
6. Press ,
PLAY B-K
free (not allocated) channel between channel
22 and 69 in your area.
7.
7.
Press
FWD 1- B
If you cannot get an interference-free picture
and sound, switch the built-in modulator off.
repeatedly until "--" appears
Press
STOP C-L
next to "RF OUT CH" on the TV screen.
Then confirm with
FWD 1- B
please connect your VCR to your TV with a
Scart cable.
8.
8. To end, press
STATUS/EXIT
PLAY B-K
FWD 1- B
PLAY B-K STOP C-L
.
35
.
or to select a
STOP C-L 0..9
.
. In that case,
.
.
and
12 EN