Step 4: Setting The Speakers' Channels - Philips LX7100SA User Manual

Getting Started
Step 4: Setting the speakers'
channels
You can adjust the delay times (centre
and surround only) and volume level for
individual speakers. These adjustments let
you optimise the sound according to your
surroundings and setup.
2
3 6
~
7
1
1
In disc mode, press SYSTEM MENU.
2
Use 1 2 3 4 on the remote to navigate
in the menu.
3
Select icon and press 4.
Move to and press 2.
Move to {Speakers} and press 2.
1en
Digital output
Analog output
Night mode
Karaoke vocal
Speakers
PCM output
20
001-045-LX71-22-Eng
4
5
6
1en 1 st
All
Multi-channel
Off
Off
Settings...
48 kHz
20
Press 3 4 to select (Front L&R, Center,
Surround L&R, Sub woofer) then press 2
to enter the speaker setting menu.
The test tone will be automatically
generated. To help you judge the sound
level of each speaker, the left front
speaker is always on during the setting.
1en 1en
A B C
Use 3 4 to adjust the settings for each
speaker that suit your surround sound
needs, which may include :
A Adjusting the volume levels for one or
both speakers until the sound evens.
B Turning on or off the sound output.
C Delay time settings - use the longer
delay settings when the surround
speakers are closer to the listener
than the front speakers.
Press OK to confirm.
To remove the menu
Press SYSTEM MENU.
Helpful Hint:
– You can also adjust the volume via the
respective control buttons on the remote :
SUBW +/-, REAR +/- and
CENTER +/-.
– Set the phase polarity (0º or 180º) at the
rear of the active subwoofer to determine
better bass reproduction effect in your
listening environment.
8/07/2003, 11:26 AM
1 st
3139 115 22741