Connecting without a scart cable
a
Switch off the TV set.
b
Remove the aerial cable plug from your TV set and insert
it into the
socket at the back of the video recorder.
2
c
Plug one end of the aerial cable provided into the
socket on the video recorder and the other end into the
aerial input socket on your TV set.
d
Insert one end of the mains cable into the mains socket
at the back of the video recorder and plug the other
4
end into the wall socket.
e
Switch on your TV set and select the programme number
that you have chosen for video playback (see instruction
manual TV set).
f
Tune in the TV set until this picture appears on channel
35 or 583MHz.
CONGRATULATIONS ON THE
PURCHASE OF YOUR NEW
PHILIPS VIDEO RECORDER
TO CONTINUE PRESS OK
D If you were using a video recorder before you will
probably need to retune the 'video channel' on yout
TV to obtain this picture.
g
When the TV has been tuned read the paragraph 'Initial
installation' in the chapter 'INSTALLING YOUR VIDEO
RECORDER'.
6
Connecting a decoder or other equipment
You can connect additional equipment to the
socket. For example: a decoder, a satellite receiver or a
camera recorder.
You can connect a HIFI-stereo set to the sockets
(audio output left/right) and
AUX OUT L R
input left/right).
3
EXT.2 AV 2
(audio
AUX IN L R