Changing The Unit's Settings; Common Procedures - Panasonic DMR-E20 Operating Instructions Manual

TV
VOL
TV/AV
OPEN/CLOSE
2·3·
4
ENTER
PROG / CHECK RETURN
TOP WINDOW STATUS
FRAME
TV ASPECT TV/TEXT
SKIP SLOW/SEARCH
STOP PAUSE PLAY
1 2 3
4 5 6
7 8 9
SV/V+
/
0
REC REC MODE CANCEL
MANUAL INPUT
TIME SLIP
SKIP SELECT
DIRECT
LAST
TV REC AV LINK AUDIO
MARKER
TIMER
DVD TV SETUP
REC
Á
1

Changing the unit's settings

Common procedures

Refer to the summary of settings table on page 75 and use the following procedure to change the
settings if necessary.
Preparation
≥Switch [DVD, TV] to "DVD".
1
While stopped
Press [SET UP] to show the menus.
(2)
(1)Menus
The SET UP menu is made up of six menus — Settings, Disc, Picture, Sound, Display,
and Connection. Select the menu's tab to display the items.
(2)Items
A list of items in the menu you selected.
(3)Options
This shows the current settings. The options are shown when you select an item.
Use the joystick [2, 1] to select the menu's tab.
2
Use the joystick [3, 4] to select the item you want to change and press
3
[ENTER]
Use the joystick [3, 4] to select the option and press [ENTER]
4
≥Some options require different operations. Follow the on-screen instructions and the
instructions described.
ªTo return to the previous screen
Press [RETURN]. Even if you have changed an option, the change is not accepted unless you
press [ENTER]
ªWhen you are finished
Press [SET UP].
For your reference
≥The unit retains these settings in its memory until you change them, even if you turn it off.
≥You can also display the SET UP menus by pressing [TOP WINDOW], using the joystick
[3, 4, 2, 1] to select "SET UP", and pressing [ENTER].
74
(1)
(3)