Wash Cycle Options - Haier HDP18PA User Manual

HDP18PA-MANUAL 4/9/02
Selecting Wash Cycle:
For your convenience, your dishwasher has four options to select from: Normal,
Heavy, Light and Rinse & Hold option. Press Button 1 to select proper wash cycle
option based on the soil content on your dishware.
Normal Wash Cycle:
• This is used for regular loads for medium soiled dishware, silverware and
glassware.
Heavy Wash Cycle:
• This cycle is used for heavily soiled dishware, glassware, silverware, pots & pans
and cookware with dried soils.
Light Wash Cycle:
• This cycle is used for lightly soiled or pre-rinsed dishes and silverware.
Rinse & Hold Cycle:
• This cycle is used for rinsing partial loads that will be washed later.

Wash Cycle Options:

• When washing your dishware, you can select Upper Load/Full Load, Vented Dry
and Delay Start options.
Upper Load or Full Load Option:
• Press Button 2 to select the proper load option depending upon the load size.
Upper Load Option:
• You can select this option when you want to wash small numbers of
dishware or glassware. You can place them on the upper rack and
select "Upper" load option on the control panel.
Note: The lower rack must be empty when using "Upper" load option. You must
use one-half the amount of detergent than you would normally use for full
load option.
4:22 PM Page 16
Heavy Rinse & Hold
Normal Light
1
English
Upper Load
Full Load
2
14