Paper Jams Within Fuser Unit - Toshiba e-STUDIO195 Operator's Manual

6
Check that the guide width is correct, there is no folded/curled
paper or overloading, and then close the drawer.
Be sure that the height of the stacked paper does not exceed the line indicated inside
of the side guides.
Do not allow any gap between the paper and the end guide in the drawer.
7
Close the transfer unit and the side cover.

Paper jams within fuser unit

Be careful not to let your fingers be caught between the equipment and the side cover.
This could injure you.
Do not touch the fuser unit or the metal part around the unit.
This could cause burns, or injury to your hands if you touch the inside of the equipment.
Paper Jams 185