Configuration Information - Factory Integrated Models - HP ProLiant BL30p Specification

QuickSpecs

Configuration Information - Factory Integrated Models

NOTE: HP does not allow factory integration of options into standard models listed above.
Configure-to-order servers must start with a CTO Chassis.
Step 1: Base Server Blade Configuration
Model
Step 2: Choose Required Options (only one of the following from each list unless otherwise
noted)
Processor
Memory
Step 3: Choose Additional Options for Factory Integration
Hard Drive
Fibre Channel Option
HP ProLiant BL30p Configurable Model
Configurable Model ships with:
- Two embedded NC7781 PCI-X Gigabit NICs plus one 10/100T NIC for iLO
- Integrated Lights-Out (iLO) Management with Advanced Pack features
For single processor configuration choose:
Xeon 3.06GHz/533-512 FIO Base
For dual-processor configurations choose two each of:
Xeon 3.06GHz/533-512 FIO Base
Xeon 3.2GHz/533-1M FIO
Xeon 3.2GHz/533-2MXeon 3.2GHz/533-2M FIO
NOTE: Dual-processor configurations must have a matching pair of CPUs. Mixed clock speeds
are not supported.
NOTE: Two-way interleaving memory is enabled when an identical pair of DIMMs is installed.
For 1GB Total Memory choose A or B:
A) 2 x 512 MB PC2100 DDR SDRAM DIMMs
B) 1 x 1GB PC2100 DDR SDRAM DIMM
For 2GB Total Memory both A and B are required:
A) 1 x 1GB PC2100 DDR SDRAM DIMM
B) 1 x 1GB PC2100 DDR SDRAM DIMM
For 4GB Total Memory:
2 x 2048MB PC2100 DDR SDRAM DIMM 2x2048
60GB Small Form Factor ATA Hard Drive, 5400 rpm
BL30p Dual Port Fibre Channel Adapter
NOTE: For additional options, including BL30p blade sleeve, server blade enclosure with
enhanced backplanes, interconnect options and power subsystem options, please refer to the
"Options" section below.
DA - 11958 North America — Version 6 — September 24, 2004
HP ProLiant BL30p Server Blade
367243-405
354053-L21
354053-L21
368273-B21
364306-B21
300679-B21
287497-L21
287497-L21
287497-B21
300682-B21
354052-B21
354054-B21
Page 21