Panasonic KX-TD308 Installation Manual page 225

Features
3
Conditions
Programming References
Feature Reference
Operation References
-User Manual
UCD can be used in the following cases:
l
a) The floating number of UCD is assigned as the DIL 1: 1 destination.
b) The floating number of UCD is assigned as the Intercept Routing
destination.
c) The floating number of UCD is dialed from an extension.
d) The floating number of UCD is dialed from DISA.
This feature requires assignment of an UCD group in System
l
Programming. An extension cannot belong to two or more UCD
groups.
The floating number can be assigned on an UCD group basis. The
l
UCD group is based on the extension group.
It is possible to set the log-in or log-out status on an extension basis.
l
An UCD call can arrive at an extension in log-in status within the UCD
group, but cannot arrive at extensions in log-out status. If the extension
would like to leave the group temporarily, the extension sets the log-out
status by the feature number to prevent UCD calls being sent to his/her
extension. When the extension re-joins the group, the extension sets the
log-in status.
There should be at least one extension that is in log-in status.
l
Section 4, System Programming
[ 1061 Station Hunting Type
Section 3, Features
Extension Group
Log-In / Log-Out
DPT Features, Standard Telephone Features
Uniform Call Distribution (UCD)
Station Hunting
Features 3-165