Panasonic KX-T7400 Series Notice

Additional Operating Instructions for KX-T7400 Series and Added and
Changed Features for the Operating Instructions for the KX-TD208E
User Manual Addendum for KX-T7400 Series
Configuration
Added and Changed Features for Operating Instructions
Changed Features — Section 3.1 System Management
Least Cost Routing
Flow Chart of LCR
Is the dialled number an emer-
gency call number?
Is the dialled number the BTL
access code?
Does the area code match the
route selection code of Route 1?
Does the area code match the
route selection code of Route 2?
Does the area code match the
route selection code of Route 3?
Does the area code match the
route selection code of Route 4?
Other changed items P. 53-55
Printed in Japan
N O T I C E
P. 4-5 KX-T7431 / KX-T7433 / KX-T7436 do not have a RINGER Volume Selector.
P. 48 Please delete the third box from the top, "Does the first digit match the leading
digit?". Please use the following flow chart.
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
Yes
No
BTL is selected.
P. 49 Please delete item (3) "LCR Leading Digit Entry".
P. 50 Please delete [707] "LCR Leading Digit Entry" from the reference of the
Programming addresses.
Please change the default value of [207] "Message Waiting Ring Interval Time"
(3.5 Timer Programming) from 10 minutes to 0 minutes.
P. 53-55 Please delete the System Programming [707] "LCR Leading Digit Entry"
(3.10 LCR Programming, 5.4 Default Values).
P. 55 Please delete the following item.
3.10 LCR
Programming
Added
Does the area code match the
exceptional code of Route 1?
Yes
Does the area code match the
exceptional code of Route 2?
Yes
Does the area code match the
exceptional code of Route 3?
Yes
Does the area code match the
exceptional code of Route 4?
Yes
[707] LCR Leading
Digit Entry
Removing
No
and Adding
the dialled
number.
Route 1 is
selected.
Removing
No
and Adding
the dialled
number.
Route 2 is
selected.
Removing
No
and Adding
the dialled
number.
Route 3 is
selected.
Removing
No
and Adding
the dialled
number.
Route 4 is
selected.
Please change the D
EFAULT
from "0" into "Not stored".
PSQW1443YA
KF0599KM1059
BTL is
selected.
value