Table of Contents
Advertisement
The following figure shows a three-connector diskette drive
signal cable.
Diskette drive signal cable
A – Connects to 1.44-MB Diskette Drive
B – Connects to Optional Tape Backup Unit
C – Connects to System Board
IDE Signal Cables
Each system comes with a three-connector IDE interface
cable attached to the primary IDE connector, and another IDE
cable joining the CD-ROM/DVD drive to the secondary IDE
connector.
Each IDE connector on the system board supports two
devices. The addition of a device to an IDE connector does
not require the replacement of the existing signal cable.
Installing Options 5-21
Advertisement
Table of Contents
