Vivitar ViviCam T328 User Manual page 17

6. Press the MENU/OK button to confirm, save your choice and exit to the camera standby mode.
7. The selected icon appears on left side of the LCD screen.
Flash
In low light conditions it is best to use the built-in flash. You can also use the flash to compensate for
backlight conditions.
Force Flash,
To set the flash:
1. Touch the icon
appears on the left side of the LCD screen. This will activate the automatic flash.
2. Touch the icon
the flash function has been "forced on" (manual flash).
Note: If the flash is not ready, a LED will light up and the
the flash is ready before taking a photo.
Auto, Red eye reduction,
function area on the bottom right of the touch screen until the
function area until the icon appears on the LCD screen. This means
icon will flash repeatedly - wait until
16
No Flash
icon