Miele DA 279-4 Alu EXT Operating And Installation Manual page 31

3 protective sheets
for use when fitting the tower.
2 hose clips
for securing the exhaust ducting.
1 reducing collar
for exhaust ducting C 125 mm.
1 non-return flap
for fitting into the exhaust connection
on the motor unit (not needed for
recirculation mode)
Telescopic wall bracket
for securing the cooker hood to the
wall.
Conversion kit for recirculation
mode
including directional unit and flexible
aluminium hose (the conversion kit is
not supplied with the cooker hood
but is available as an optional extra,
see "Technical data").
6 screws 5 x 40 mm and
6 x S 8 plugs
for securing the wall bracket.
The screws and plugs are designed
for use in solid walls only.
For other types of wall construction,
alternative fixings will be required.
Make sure that the wall is able to
take the weight of the cooker hood.
2 x M 6 self-tapping nuts
for securing the appliance.
2 screws 3.9 x 7.5 mm
for securing the tower.
1 hexagonal (Allen) key
for adjusting the height of the
appliance.
1 lever for dismantling the tower.
Installation instructions
Installation
31