Direct De-Authorization - Yamaha PM1D v.2 Installation Manual

23
Click [Save in file] to save the access key as a text
file.
You can also write down the access key displayed on the
screen.
24
Copy the saved text file to the computer (#1) that
is connected to the CS1D.
Follow the steps below on computer #1.
25
Start the installer, select [Authorize], then [Have
already obtained access key], then click [Next].
The following window opens.
26
Click [Read from file] to read the text file saved in
Step 23.
27
Make sure that the correct access key is displayed,
then click [Next].
The COM port setting window opens.
28
Make sure that the COM ports specified in Step 9
are selected, then click [Next].
A dialog box indicating the installation progress will
appear, and installation will begin.
29
When the installation is complete, the following
window opens.
30
Remove the check mark from the [Start online
user registration] check box, then click [Finish].
We recommend that you access the following web page
from a computer connected to the Internet and register the
product. User registration entitles you to additional
information and support.
http://www.yamahaproaudio.com/register/
NOTE: After the installation is complete, the registration code and
access key will become invalid. To avoid problems that may occur
during re-installation, after the installation is complete, delete the
text files that contain the registration code and access key.
31
The installation is now complete.

Direct De-authorization

If you wish to move the license from one CS1D to another, you
must first de-authorize the license on the current console. If you
can access the Internet directly from your computer, follow the
steps below to de-authorize the software. See page 12 if you
access the Internet from a different computer.
Follow Steps 1 through 6 (on page 8) for direct installation, then
proceed with the following.
7
8
9
PM1D V2 System Software Installation Guide
Turn off the power to the PW1D, then turn it on.
The CS1D starts in normal mode.
Select [De-authorize], then click [Next].
The following window opens.
Select [Create unregistration code], then click
[Next].
The following window opens.
Enter the PRODUCT ID, then click [Next].
The COM port setting window opens.
11