Main Window; Panel Selection Area; Serial Port; Power And Mute - Mitsubishi Electric DLP PH50 series Manual

4.6. Main window

4.6.1. Panel selection area

Used to select panels to be controlled with clicking or dragging. Selected panels become bright to
indicate active state. Previous selected panels become non-active. When you click a panel with
pressing shift key, the previous selected panels remain the active state and new panel will be
added on the state.

4.6.2. Serial Port

Used to switch open and close of a serial port in the control PC.

4.6.3. Power and Mute

Power: Used to turn on/off the power of active panels.
Mute: Used to switch picture mute of active panels.

4.6.4. Information

Input signal: Displaying whether an image signal is input to the selected cubes.
Optional Scaler: Displaying whether the optional RGB input board is mounted.
Video Decoder: Displaying whether the optional video input board is mounted.
Lamp Changer: Displaying whether the lamp changer unit is equipped.
113
REV 2.4