Supervising And Controlling By Computer - Mitsubishi Electric DLP FD730U User Manual

Advanced features (continued)
Setting the efficient mode
By pressing the EFFICIENT MODE button, you
can display the EFFICIENT MODE menu to set the
following menu items: LAMP MODE, STANDBY
MODE, and AUTO POWER OFF. (For details of each
item, see page 23.)
1. Press the EFFICIENT MODE button.
• The EFFICIENT MODE menu appears.
EFFICIENT MODE
LAMP MODE
STANDBY MODE
AUTO POWER
OFF
2. Select an desired item to set by pressing the  or
 button.
3. Set the selected item by pressing the  or 
button.
4. Repeat steps 2-3 for each setting.
5. Press the EFFICIENT MODE button to exit the
menu.

Supervising and controlling by computer

You can supervise and control the projector's
operation using a personal computer via a LAN.
Major functions
ProjectorView Global+
Batch projector controlling / supervising application
software
• Batch operation of stand-alone projector / multiple
projectors
• Scheduling function to turn ON/OFF for each day of
the week
• Checking each condition of the projector and
detecting a theft
• Setting of the projector's IP CONFIG
• Startup of the controlling / supervising tool
(ProjectorView) using the Web browser
• Activating Visual PA2 to display the specified
characters on the projector's screen
ProjectorView
The controlling /supervising tool using the Web
browser
• Controlling and supervising a single projector
• Setting of the projector's network function
• Setting of the Alert E-mail service of the projector
PJLink™
This projector supports standard protocol PJLink™
for projector control and you can control and monitor
projector's operations using the same application
among projectors of different models and different
manufacturers.
STANDARD
STANDARD
OFF
EN-35
About ProjectorView Global+ and ProjectorView
• For details, see "LAN control UTILITY operation
manual" in the CD-ROM.
About PJLink™
• To use PJLink™ function, the PJLink™
application software is required.
• To use this function, set the PJLink™ certification
properly according to the setting of the network
application to be used. (See page 31.)
• For the specifications of PJLink™, access to
the Web site of Japan Business Machine and
Information System Industries Association
(JBMIA). (http://pjlink.jbmia.or.jp/english)
• This projector is fully compliant to the
specifications of JBMIA PJLink™ Class 1. It
supports all the commands defined by PJLink™
Class 1, and the compliance has been verified
with the PJLink™ standard specifications
Version 1.0.
Important:
• For the commands for PJLink™, see the table on
the next page.
• The control may not be performed correctly or the
monitoring data may not be obtained correctly in
the following conditions:
· During standby
· During input source switching
· During auto position execution
· During AV mute
· During command processing
· Before the splash screen disappears after the
power is turned on.
• Use 1 controller to control/monitor 1 projector.
• For how to control/monitor using PJLink™, see the
operation manual of the PJLink™ application you
use.
• When you monitor the projector's operating state
using this function by issuing inquiry commands
successively, issue an inquiry command after
receiving the response to the previous inquiry
command from the projector.