Table of Contents
Advertisement
Connecting AC Power
Run your computer using AC power, rather than battery power, for
the first time. This ensures that you will not lose power while you
complete the Windows setup operation.
•
1
•
1.
On the front edge of the computer, slide the display cover latch to the right and
raise the cover.
2.
Plug the cable from the AC adapter into the AC adapter jack on the rear side of
the computer.
3.
Connect the power cord to the AC adapter.
1-2
Use only the AC adapter supplied with your computer, or
supplied by your computer vendor. You can damage your
computer if you try to use an AC adapter not approved for use
with this system.
When removing the AC power cord from a wall outlet, grip the
plug and pull it from the socket. Never remove the power cord
from the outlet by pulling on the cord. Always grip the plug.
Display Cover Latch
AC adapter jack
To power outlet
AC adapter
Advertisement
Table of Contents
