Main Page - Sharp PC-A820 Manual

Main Page

System Time Defines the system time, using the format hour:minute:second (24-
hour format). The Tab key moves the cursor, and the Space bar and the Plus and
Minus keys change numbers.
System Date Defines the system date. The Tab key moves the cursor, and the Space
bar and the Plus and Minus keys change numbers.
Diskette A Always set to 1.44MB,3½. You cannot change this item.
Diskette B Lets you enable the floppy disk or define it as Not Installed. To use it,
set this item to 1.44MB,3½".
Primary Master Press Enter to display the primary master sub-menu. Type is set to
Auto so that the system automatically detects the hard disk drive in your system.
Press Esc to return to the Main page.
Secondary Master Press Enter to display the primary master sub-menu. Type is set
to Auto so that the system automatically detects the CD-ROM drive in your system.
Press Esc to return to the Main page.
Display Device Selection This item determines where the video is displayed when
the system is first started. It is recommended to leave this at the default value
LCD/CRT.
8
Resolution Expansion If you enable this item, the system will add extra pixels to
screen resolutions that are less than 1024x768 so that they occupy the whole area of
the built-in display. Note that resolution expansion causes some distortion of the
image on the screen.
PS/2 Mouse Enables or disables the glide pad built into your system.
Boot Options Press Enter to display the Boot Options sub-menu. If Summary
screen is Enabled, the system shows a hardware summary at start-up time. If Quiet
boot is Enabled, the system displays the Sharp logo screen. Press Esc to return to the
Main page.
System Memory Shows the size of conventional memory for starting MS-DOS.
8-3