Table of Contents
Advertisement
Password
Power Management Security
Diskette access
Fixed disk boot sector
When the system starts or resumes from the suspend-to-disk mode
If you
have enabled Passrvord
system requires a password when you turn on the computer. If you have enabled
requires a password when the system resumes from the suspend-to-disk mode.
The person who does not know the supervisor password cannot
Supervisor
Setting the Password
In the
Set
User Password
Type your password (up to eight characters), and press
Type the same password again, and press
When the confirmation message appears, press
Press
and select
5.
Press
Enter
6.
If you use the computer personally
We recommend that you set the supervisor password. You can prevent other people
from using your computer by enabling
the Setup Utility.
If you share the computer with others
We recommend that a person who administers the computer sets both supervisor
and
passwords and lets the other people know only the user password.
user
Deleting the Password
1.
In the
delete and press
in the
on hoot
in the Po,r*eer menu of the Setup Utility, the system
Security
in the
menu of the Setup Utility.
menu of the Setup Utility, select Set
and press
Enter.
twice. The system restarts and asks the password you have set.
menu of the Setup Utility, select the password item you want to
Enter,,
nienu of the Setup Utility, the
Security
Diskette access is
Supervisor Password
Enter.
Enter.
Enter.
in the
Password on hoot
or
menu of
Security
Advertisement
Table of Contents
