Honda 2008 Pilot Owner's Manual page 282

Changing a Flat Tire
WHEEL NUT WRENCH
17. Insert the hoist bracket into the
center hole of the flat tire.
18. Slowly turn the wheel nut wrench
clockwise to take up the slack of
the hoist cable. Make sure the
bracket is seated in the center
hole of the flat tire.
276
19. Turn the wheel nut wrench
clockwise until the flat tire rests
against the underbody of the
vehicle and you hear the hoist
click.
Always raise the spare tire hoist, even
if you are not stowing a tire. If the
hoist is lef t down, it will be damaged
during driving and need to be replaced.
20. Store the jack in its holder. Turn
the jack's end bracket to lock it in
place. Replace the cover. Store the
tools.
21. Refer to Changing a Tire with
TPMS (see page 213 ).
Loose items can fly around the
interior in a crash and could
seriously injure the occupants.
Store the wheel, jack, and tools
securely before driving.