Table of Contents
Advertisement
Vents and Heating
Air flows from the center
vents in the dashboard, the vents on
both sides of the instrument panel,
and from the floor vents. Select this
position when you drive with the
removable hardtop removed.
Air flows from the floor
vents and the vents on both sides of
the instrument panel.
Airflow is divided between
the floor vents and the defroster
vents at the base of the windshield,
and the vents on both sides of the
instrument panel.
Air flows from the defroster
vents at the base of the windshield
and the vents on both sides of the
instrument panel.
When you select
or
the system automatically switches to
Fresh Air mode.
102
Ventilation
The flow-through ventilation system
draws in outside air, circulates it
through the interior, then exhausts it
through vents behind the seat-backs.
1.
Set the temperature to the lower
limit.
2.
Select
and fresh air mode.
3.
Set the fan to the desired speed.
Using the Heater
The heater uses engine coolant to
warm the air. If the engine is cold, it
will be several minutes before you
feel warm air coming from the
system.
1.
Select
and fresh air mode.
2.
Set the fan to the desired speed.
3.
Adjust the warmth of the air with
the temperature control dial.
,
To Defog and Defrost
To remove fog from the inside of the
windows:
1.
Set the fan to the desired speed, or
high for faster defrosting.
2.
Select
. The system
automatically switches to fresh air
mode.
3.
Adjust the temperature so the
airflow feels warm.
4.
Select
to help clear the
rear window.
5.
To increase airflow to the
windshield, close the corner vents.
When you select
or
the system automatically turns on
the fresh air mode. This helps to
defog the windshield.
,
Advertisement
Chapters
Table of Contents
