Installing A Kvm Module - HP BladeSystem c3000 Setup And Installation Manual

To remove a fan, turn the handle counterclockwise to the unlock position, and pull the fan out of the
enclosure.

Installing a KVM module

You can use the optional HP BladeSystem c3000 KVM Module to connect the enclosure to a USB keyboard,
video monitor, and USB mouse (KVM). You can also connect the KVM module to the HP Server Console
Switch or HP IP Console Switch using the HP USB Interface Adapter.
To use the KVM module, you must have HP BladeSystem Onboard Administrator version 2.10 or later
installed. For more information on using the KVM module software, see the HP BladeSystem Onboard
Administrator User Guide.
To install a KVM module:
Press the tab, and then pull the KVM module blank from the enclosure.
1.
Installing components 39