Download
Share
Print this page
Pioneer PRO-510HD Service Manual
  1. Manuals
  2. Brands
  3. Pioneer Manuals
  4. Projection TV
  5. Elite PRO 510HD
  6. Service manual
Pioneer PRO-510HD Service Manual

Pioneer PRO-510HD Service Manual

Projection monitor receiver
Hide thumbs Also See for PRO-510HD:

Advertisement

Quick Links

Download this manual
PROJECTION MONITOR RECEIVER
PRO-610HD
PRO-510HD
SD-582HD5
SD-532HD5
THIS MANUAL IS APPLICABLE TO THE FOLLOWING MODEL(S) AND TYPE(S).
Type
PRO-610HD PRO-510HD SD-582HD5 SD-532HD5
KUXC/CA
KBXC
––
This service manual should be used together with the following manual(s):
Model No.
PRO-610HD
CONTENTS
6. ADJUSTMENT ................................................ 195
7. GENERAL INFORMATION ............................ 219
7.1 DIAGNOSIS .............................................. 219
7.1.1 DIAGNOSIS METHOD .................... 219
7.1.2 DISASSEMBLY ............................... 224
7.1.3 WIRING DIAGRAM ......................... 226
PIONEER CORPORATION
PIONEER ELECTRONICS SERVICE, INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER ELECTRONIC (EUROPE) N.V. Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
PIONEER CORPORATION 1999
Model
––
––
Order No.
ARP3047
4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan
Power Requirement
AC120V
AC120V
Remarks
7.2 IC .............................................................. 228
7.3 EXPLANATION ......................................... 254
8. PANEL FACILITIES AND SPECIFICATIONS
.............................................................. 266
ORDER NO.
ARP3051
Remarks
O–ZZR NOV. 1999 Printed in Japan

Advertisement

loading

Related Manuals for Pioneer PRO-510HD

Summary of Contents for Pioneer PRO-510HD

  • Page 1 PIONEER CORPORATION 4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan PIONEER ELECTRONICS SERVICE, INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A. PIONEER ELECTRONIC (EUROPE) N.V. Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936 PIONEER CORPORATION 1999 O–ZZR NOV.
  • Page 2 PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5...
  • Page 3 PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5 6. ADJUSTMENT 6.1 INTRODUCTION • IMPORTANT When replacement of the following assemblies are required during repairs, be sure to replace the EEPROMs with the mounted ones in order to retain the adjustment data of the unit and to facilitate adjustment after the replacement of the assemblies.
  • Page 4 PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5 6.3 ADJUSTMENT LOCATION AND ITEMS Assembly Adjustment Location CONV. AMP ASSY Focus VR (VR1) DEFLECTION (SERVICE) ASSY DIGITAL CONV. ASSY Focus VR VIDEO ASSY SUB VIDEO ASSY Rear View SIGNAL ASSY Front View Deflection Deflection Yoke (B)
  • Page 5 PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5 Assembly Adjustment Location Guide is repaired or replaced If POWER SUPPLY ASSY No adjustment is required Brightness Adjustment ( 2) Focus Adjustment (VR1: FOCUS VR) ( 2) is repaired or replaced If DEFLECTION SERVICE ASSY Screen Size Adjustment ( 2)
  • Page 6 PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5 6.4 FACTORY ADJ MODE Start Start adjusting Factory Adjustment Mode 1st FAC Select 1st FACTORY ADJ mode, then adjust. Select 1st FACTORY ADJ Mode Selecting the mode for adjustment operations. Start Normal Front panel picture /SAT...
  • Page 7 PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5 OTHER OFFSET mode To enter the OFFSET mode of each picture quality, use the following keys and codes of the remote control unit: Key(s) on the Remote Control Unit STD OFFSET MODE DOWN COMP (15 kHz) OFFSET MODE...
  • Page 8 PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5 6.5 ADJUSTMENT Brightness Adjustment Start 1st FAC Input signal : Black Burst (INPUT 1) Black burst ADJUTMENT OFFSET /SAT ON/OFF POWER ADJUTMENT OFFSET INPUT (DOWN) SPLIT SEARCH SELECT SCREEN SUB CH MODE FREEZE AUDIO DISPLAY ∞...
  • Page 9 PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5 Deflection Yoke Adjustment Deflection Yoke Lean Adjustment • Input a stable signal (e.g. from an LD player or SG) to Start the INPUT 1 connector. • MENU SETUP Enter the MULTI-POINT (FULL) in the CONVERGENCE. • The cross hatch disappears if there is no operation with...
  • Page 10 PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5 Focus Adjustment Focus Adjustment of Lens Assy Start Lens assy (For Green) Cross hatch Lens assy Lens assy (For Red) (For Blue) "Best focusing" Focus VR Adjustment Cross hatch Focus VR (VR1) FOCUS VR Turn the Focus VR for best focusing.
  • Page 11 PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5 Test-cross Position Check • Check the test-cross position. If it is located within 20 mm from the center of the screen, no adjustment is required. If it is not, adjust the position as follows: • Input a stable NTSC (480i) signal (e.g. from an LD player) and adjust the position.

  • Page 12: Screen Size Adjustment

    PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5 Screen Size Adjustment Check if both vertical and horizontal sizes are within 91% 2%. If they are not, perform the size adjustment as follows: Size Mode • Mode for roughly adjusting the horizontal and vertical sizes of the...
  • Page 13 PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5 Note : Horizontal Size Adjustment Note : Screen mode : FULL • After the V. SIZE adjustment, enter the H. SIZE adjustment 1st FAC Start by pressing "1" key. • After the H. SIZE adjustment, INPUT 1:Monoscope check that V.
  • Page 14 PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5 CONVERGENCE ADJUSTMENT The data stored in the EEPROMs are as follows: 1. Procedures IC1410 1. When replacinf the DIGITAL CONV. Assy, replace the EEPROM OFFSET CONVER. MODE 1 (DFH, DFV) of new DIGITAL CONV. Assy with the EEPROM of old OFFSET CONVER.
  • Page 15 PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5 Table 2 OFFSET CONVER DATA The cross-hatch signal is generated inside the unit, and is auto- matically displayed in OFFSET CONVER. mode and MANUAL OFFSET CONVER MODE 1 CONVERGENCE mode. You can turn on and off the cross-hatch...
  • Page 16 PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5 • Pattern for each adjustment item Key No. Key No. Key No. STATIC SKEW SIZE = Fixed position Key No. Key No. Key No. Key No. STATIC SKEW SIZE Note 1: When the green CRT is replaced, or when the deflection yoke for the green is replaced, prior to the convergence adjustment, tune the center of the image to the center of the screen by turning the centering magnet.
  • Page 17 PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5 3.4.3 3.4.4 Press the SET/ENTER key when the point to be adjusted is When adjustment of the selected point is finished, press the determined. SET/ENTER key, then adjust the other adjustment points by repeating 3.4.1 to 3.4.4.
  • Page 18 PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5 4th step In a case of an error in convergence: Repeat 2nd and 3rd steps to take total balance. Then the adjust- ment for the green is completed. To return from the fine adjustment mode to the coarse adjustment mode, press the MENU key once, then the DOT key.
  • Page 19 PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5 • Pattern for each adjustment item Key No. Key No. Key No. Key No. SKEW SIZE STATIC Key No. Key No. Key No. Key No. STATIC SKEW Key No. Note 1: When the red CRT is replaced, or when the deflection...
  • Page 20 PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5 When all the adjustments are completed, or to interrupt 3.6.5 adjustment, press the MENU key to quit Convergence Repeat procedures 3.6.2 through 3.6.4 for the other screen modes. Adjustment mode. The display will be unstable for several...
  • Page 21 PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5 White Balance Adjustment This mode is to set the standard picture quality for a normal picture. Start < Picture Quality > 1st FAC OFFSET : COLOR (–64 to 63) /SAT ON/OFF POWER INPUT (DOWN) SPLIT SEARCH...
  • Page 22 PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5 Adjustment Procedure of White Balnce OFFSET Data Table Without RGB Input RGB Input COLOR NEWS LIVE FILM STD FILM MOVIE B&W STD B&W MOVIE NEWS LIVE FILM B&W TEMP Setting GAME User MOVIE Mode COMPORNENT 15K...
  • Page 23 PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5 DIRECT KEY OFFSET DATA (VIDEO) OFFSET MODE MODEL ADJ :Adjustment item PRO-610HD SD-582HD5 ADJ NAME The numerical value is shipping a set value in the factory. PRO-510HD SD-532HD5 A set value is data of 1999.11 present provinces.
  • Page 24 PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5 Panel Adjustment • Mode for adjusting the brightness, contrast LEFT and RIGHT of the Start 1st FAC gray part (panel) of the 4:3 normal screen. /SAT ON/OFF POWER <Data value section> INPUT SPLIT SEARCH SELECT SCREEN...
  • Page 25 : RIGHT (–128 to 127) Note : • Adjustment required only for the PRO-510HD/610HD to which a BIB (SH-D07/D09) can be connected. • No adjustment is needed for the SD-582HD5/532HD5. • The adjustment procedures are the same as those described in "8 Panel Adjustment," except for the following: •...
  • Page 26 PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5...
  • Page 27 PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5 7. GENERAL INFORMATION 7.1 DIAGNOSIS 7.1.1 DIAGNOSIS METHOD How to diagnose a failure Various protection circuits are provided for this unit. When these The D915 LED of the POWER SUPPLY Assy always lights up protection circuits are activated, the power of the unit is shut down when the power is turned off because of the protection circuits (P.D.).
  • Page 28 PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5 1. P.D. (1) Failure in the POWER SUPPLY Assy and the AUDIO Assy. There are four main possibilities: 1. Abnormality in the regulator of the heater 2. Blown fuse(s) in secondary 3. Abnormality in RELAY (RY102) 4.
  • Page 29 PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5 Note: The anode of the diode is high only for a short time after the power is turned on until the protection circuits are activated (P.D.) The LEDs are lit by the HOLD circuit. Note that the power may be shut down when the voltages 130 V, 25 V, and 12 V from the POWER SUPPLY Assy are not supplied because the DEFLECTION SERVICE Assy is powered by the POWER SUPPLY Assy.
  • Page 30 PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5 4. Block Diagram of the Protection Circuit POWER SUPPLY ASSY (AWV1795 :ELITE) (AWV1808 :REGULAR) D915 POWER SW ASSY (AWZ6467) SIGNAL ASSY VIDEO ASSY (AWV1800 :ELITE) (AWV1799 :ELITE) (AWV1805 :REGULAR) (AWV1804 :REGULAR)
  • Page 31 PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5 DEFLECTION SERVICE ASSY (AWV1809) D321 D923 CONV. AMP ASSY (AWZ6456)
  • Page 32 PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5 7.1.2 DISASSEMBLY How to remove the screen (for adjusting Lens assemblies) Screen Frame Loosen a screw Loosen two screws Remove a screw Remove Upper Screen Side Cabinet Metal Fitting Upper Cabinet Metal Screen Side Fitting Note : Screen side Fitting comes off even if this screw is not removed.
  • Page 33 PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5 Lens Assy (Green) Lens Assy Lens Assy (Red) (Blue) Notes: To assemble the screen, perform the above procedures in reverse Slide the screen to right, and order. adjust the focus of the lens. After assembling it, verify that the right and left sides of the screen are positioned as shown in the figure.
  • Page 34 PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5 7.1.3 WIRING DIAGRAM Front Section Focus VR (VR1) CRT Assy (R) CRT Assy (G) CRT Assy (B) R. CRT DRIVE Assy G. CRT DRIVE Assy B. CRT DRIVE Assy FBT Focus Wire At least 15 mm away from any other parts.
  • Page 35 PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5 Rear Section Loop with a radius of 30mm or more. Ferrite Core At least 15mm away from any other parts. Loop with a radius of 50mm or more. CONV. AMP Block VIDEO Assy Block POWER SUPPLY Assy...
  • Page 36 PE5067A, EM636327Q-8, PD3420AB, SAA4990H, CD74HCT4046AM, SAA4955TJ, SAA4997H-K, 24LC128(I)P, 24LC08B(I)P, CM0006C1F, 24LC32A(I)P, ML6420CS-3, CXA2094Q, CM0010AF, TK15420M, MC33167TV CXD2303AQ (SUB VIDEO SERVICE ASSY : IC3203) (PRO-610HD, PRO-510HD ONLY) • Video A/D Converter Block Diagram DVSS ARTS A-ch 8-bit A0(LSB) A7(MSB) ARBS Digital...
  • Page 37 PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5 Pin Function - t l l l u - t l l l u c t i - t l l l u y t i - t l l l u - t l l l u...
  • Page 38 PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5 MB40958PFQ (SUB VIDEO SERVICE ASSY : IC3602) (PRO-610HD, PRO-510HD ONLY) • D/A Converter Block Diagram CLKR ROUT (MSB) R1 Master Input Current Slave Buffer Buffer F•F (LSB) R8 VCCA CLKG GOUT (MSB) G1 Master Input Current...
  • Page 39 PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5 Pin Function t i c...
  • Page 40 PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5 CXA3106Q (SUB VIDEO SERVICE ASSY : IC3201) (PRO-610HD, PRO-510HD ONLY) • PLL IC Pin Function t s i...
  • Page 41 PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5 PE5066A (SUB VIDEO SERVICE ASSY : IC3401) (PRO-610HD, PRO-510HD ONLY) • I/P System Controller IC Pin Function ) t i ) t i ) t i ) t i ) t i ) t i...
  • Page 42 PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5...
  • Page 43 PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5 ) t i ) t i ) t i ) t i ) t i ) t i...
  • Page 44 PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5 PE5067A (SUB VIDEO SERVICE ASSY : IC3501) (PRO-610HD, PRO-510HD ONLY) • I/P System Controller IC Pin Function ) t i ) t i ) t i ) t i ) t i ) t i ) t i...
  • Page 45 PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5 ) t i ) t i ) t i ) t i ) t i ) t i ) t i ) t i l a i ) t i ) t i ) t i...
  • Page 46 PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5 l a i ) t i ) t i ) t i ) t i ) t i ) t i ) t i ) t i ) t i ) t i ) t i...
  • Page 47 PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5 EM636327Q-8 (SUB VIDEO SERVICE ASSY : IC3601, IC3604) (PRO-610HD, PRO-510HD ONLY) • 16M SGRAM Pin Function l a i...
  • Page 48 PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5 PD3420A8 (SUB VIDEO SERVICE ASSY : IC3801) (PRO-610HD, PRO-510HD ONLY) • I/P System micro-computer IC Pin Function t i r t i r t i r l l i l i f l i f c i t...
  • Page 49 PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5 SAA4990H (SUB VIDEO ASSY : IC3401) (SD-582HD5, SD-532HD5 ONLY) • Progressive scan-Zoom and Noise Reduction IC (PROZONIC) Pin Function t f i n i l c i t...
  • Page 50 PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5 CD74HCT4046AM (SUB VIDEO ASSY : IC3402) (SD-582HD5, SD-532HD5 ONLY) • PLL IC Pin Function t s i t s i t i c t i c v i t SAA4955TJ (SUB VIDEO ASSY : IC3405, IC3406) (SD-582HD5, SD-532HD5 Only) •...
  • Page 51 PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5 SAA4977H-K (SUB VIDEO ASSY : IC3403) (SD-582HD5, SD-532HD5 ONLY) • BESIC (A/D, D/A Memory Control IC) Pin Function l a i l a i i g i l a i i g i v i t...
  • Page 52 PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5 24LC128(I)P (DIGITAL CONV. ASSY : IC1410) • 128Kbit CMOS Serial EEPROM Pin Assignment (Top view) Block Diagram HV GENERATOR MEMORY EEPROM XDEC CONTROL CONTROL ARRAY LOGIC LOGIC PAGE LATCHES Pin Function No. Pin Name Pin Function...
  • Page 53 PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5 CM0006CF (DIGITAL CONV. ASSY : IC1401) • Digital Convergence Correction IC Pin Function v i t l l u v i t l a i s t i s t i v i t v i t...
  • Page 54 PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5 s t i l a i c i t l a i c i t l a i c i t s t i s t i s t i s t i l a i...
  • Page 55 PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5 24LC32A(I)P (SIGNAL ASSY : IC2454) • 32Kbit CMOS Serial EEPROM Pin Assignment (Top view) Block Diagram HV GENERATOR MEMORY EEPROM XDEC CONTROL CONTROL ARRAY LOGIC LOGIC PAGE LATCHES Pin Function No. Pin Name Pin Function YDEC...
  • Page 56 PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5 CXA2094Q (SIGNAL ASSY : IC2701) • US Audio Multi-channel Decoder IC Block Diagram 45 44 47 46 40 39 FEXT2 AUX1-R TVSW AUX1-L VCATC FEXT1 RMSDET TVSW/EXT/M1 VCAWGT VCAIN MATRIX MAININ VEOUT VETC RMSDET VEWGT SPECTRAL...
  • Page 57 PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5 Pin Function t l i f t l i f l i p t l i f i r r v i t v i t n i l v i t v i t l a i >...
  • Page 58 PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5 CM0010AF (SIGNAL ASSY : IC7703) • Multi Screen Controller IC Pin Function i n i i f i l . s l . s l . s l i f i l i f i l i f i l .
  • Page 59 PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5 l i f t l i f c i t a l i , ) t l i f t l i f c i t a l i , ) t c i t v i t...
  • Page 60 PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5 2 " , " 2 " . " l a i a l i a l i...
  • Page 61 PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5 TK15420M (SIGNAL ASSY : IC7102, IC7302, IC7502) (SUB VIDEO ASSY : IC3002) • 75ohm Video Driver IC Pin Assignment (Top view) OUT A – IN A OUT B + IN A – IN B +IN B MC33167TV (POWER SUPPLY ASSY : IC204) •...
  • Page 62 PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5 7.3 EXPLANATION CONNECTING VIDEO/AUDION EQUIPMENT Front panel S-VIDEO VIDEO L-AUDIO-R (MONO) VIDEO S-VIDEO OUTPUT INPUT 4 Video movie/VCR INPUT jacks COMPONENT VIDEO INPUT jack There are 4 sets of inputs for VCR and DVD/LD players. Use Inputs three signals –...
  • Page 63 PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5 NOTE: Setting the INPUT 3 SELECT switch to ‘RGB’ will cause all S-Video and composite images input from the INPUT 3 jack to be suppressed. Similarly, setting the INPUT 3 SELECT switch to ‘S- VIDEO/VIDEO’ will cause all images input from the RGB input jack to be suppressed.
  • Page 64 PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5 PROGRAM BLOCK (V. CHIP) FUNCTION Since laws have been passed in the United States requiring a way of blocking undesirable programming, the V-chip has become a required component in television sets. The V-chip is a computer chip which decodes signals added to broadcast signals transmitted by television broadcasters.
  • Page 65 PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5 SETTING THE PROGRAM BLOCKING LEVEL Press MENU and select SET UP by using the 5 or ∞ button and then pressing SET/ENTER. Select PROGRAM BLOCK in the same way. SET/ ENTER Enter password. Press numeric buttons ‘0’ through ‘9’ to enter a four-digit password.
  • Page 66 PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5 Set BLOCK to ON. SET/ ENTER Select MPAA RATING or TV PARENTAL GUIDELINES . SET/ ENTER Select and then confirm the rank of the MPAA RATING. SET/ ENTER SET/ ENTER Select and confirm the rank of the TV PARENTAL GUIDELINES.
  • Page 67 PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5 After setting, press MENU to turn the menu off. HOW TO REMOVE BLOCKING REMOVING BLOCKING IN FROM A PROGRAM IN PROGRESS MULTI-SCREEN MODE When a selected program or a program on a channel to which Just as in normal single-screen mode, programs are blocked...
  • Page 68 PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5 MULTI-SCREEN FUNCTION VIEWING TWO SCREENS (SPLIT screen) The screen can be split vertically, making it possible to view different images on the left and right. Press the SPLIT button. (Main picture) (Sub picture) The screen on which is displayed is the main picture, and the other screen is the sub-picture.
  • Page 69 PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5 SEARCHING FOR A PROGRAM ON A DIFFERENT CHANNEL (SEARCH screen) The screen on the right side can be made into nine or three different screens, making it possible to search for programs or enjoy multiple images.
  • Page 70 PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5 MULTI-SCREEN FUNCTION Convergence adjustment may be fined-tuned from here. Press MENU and select SET UP by using the 5 or ∞ button and then pressing SET/ENTER. Adjust the center point convergence. Select ADJ MULTI-POINT . SET/ ENTER Select the adjust point.
  • Page 71 PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5 Adjust the blue line. SET/ ENTER The brackets which shows the adjusting point will move in order. Move to the next point to be adjusted, and repeat steps 4 to 6. After completing the convergence adjustment, press MENU to turn the...
  • Page 72 PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5 SPECIAL NOTES Changing Screen Mode Picture Adjustments MOVIE or GAME mode may not be selected when receiving RGB When 1080i or 480p component signals or RGB signals are input, input. SCREEN MODE will be limited to FULL.
  • Page 73 PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5...
  • Page 74 PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5 8. PANEL FACILITIES AND SPECIFICATIONS PANEL FACILITIES for PRO-610HD and PRO-510HD 1 POWER STANDBY/ON indicator A flip-down door conceals the control panel. Push gently and release, to open the door. To close the door, lift it back up into...
  • Page 75 PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5 8 RETURN button 0 INPUT 4 jacks Press to set the Projection Monitor to its initial mode. These inputs are for Video Movie and VCR. Use RCA-type pin plug cords (the same as those used in Hi-Fi systems) and S- Initial mode VIDEO cords for connections.
  • Page 76 PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5 REMOTE CONTROL UNIT (AXD1448: CU-SD110) for PRO-610HD and PRO-510HD Set the mode switch to TV/DTV. 1 TV POWER button (STANDBY/ON) Turns the power of the monitor on and off. 2 Input Selector buttons (TV, DTV* , INPUT 1 to INPUT 4) Press the button to select the source you wish to watch.
  • Page 77 PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5 0 SPLIT/SEARCH screen buttons SPLIT: Press to turn the SPLIT screen function on and off. SEARCH: Press to select the SEARCH screen mode. SELECT: Selects the screen for switching the channel or input source.* FREEZE: When this button is pressed with the regular...
  • Page 78 PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5 PANEL FACILITIES for SD-582HD5 and SD-532HD5 A flip-down door conceals the control panel. Push gently and 1 POWER STANDBY/ON indicator release, to open the door. To close the door, lift it back up into red: STANDBY place.
  • Page 79 PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5 7 RETURN button CAUTION: Press to set the Projection Monitor to its initial mode. Do not press any operation button on the Projection Monitor or the remote control unit while recording. Signals from the Initial mode...
  • Page 80 PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5 REMOTE CONTROL UNIT (AXD1449: CU-SD111) for SD-582HD5 and SD-532HD5 Set the mode switch to TV. 1 TV POWER button (STANDBY/ON) Turns the power of the monitor on and off. 2 Input Selector buttons (TV, INPUT 1 to INPUT 4) Press the button to select the source you wish to watch.
  • Page 81 PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5 REMOTE CONTROL UNIT FUNCTIONS 0 SPLIT/SEARCH screen buttons SPLIT: Press to turn the SPLIT screen function on and off. SEARCH: Press to select the SEARCH screen mode. SELECT: Selects the screen for switching the channel or input source.*...
  • Page 82 54-1/4 (W) x 26-9/16 (D) x 53-3/16 (H) inch without protective screen PRO-510HD ....1268 (W) x 640 (D) x 1289 (H) mm Horizontal resolution ..More than 1250 lines (PRO-610HD) 49-15/16 (W) x 25-3/16 (D) x 50-3/4 (H) inch...
  • Page 83 PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5 SPECIFICATIONS for SD-582HD5 and SD-532HD5 Display and amplifier section Electrical section, miscellaneous Reception system ..American TV standard NTSC system Power requirements ........120 V AC, 60 Hz Screen size ..........58" (SD-582HD5) Power consumption ......310 W, 575 VA (CSA) 53"...

This manual is also suitable for:

Pro-610hdSd-582hd5Sd-532hd5