Aux; Selecting Aux As The Source; Edit Name; Video - Pioneer CNDV-40R Operating Manual

AUX

An IP-BUS-RCA Interconnector such as the CD-
RB20/CD-RB10 (sold separately) lets you connect
your navigation unit to auxiliary equipment fea-
turing RCA output. For more details, refer to the
IP-BUS-RCA Interconnector owner's manual.

Selecting AUX as the source

➲ Switching the source ➞ Page 57
❒ If the auxiliary setting is turned off, "AUX"
cannot be selected.
➲ Switching the auxiliary setting ➞ Page 85

Edit name

1
Press the A.MENU (AUDIO) button when
the source is "AUX".
2
Select "NAME EDIT" and press the
A.MENU (AUDIO) button.
➲ Input title ➞ Page 68

VIDEO

Selecting VIDEO as the source

➲ Switching the source ➞ Page 57
❒ If you want to switch VIDEO source, select
"VIDEO" in the SETUP MENU.
➲ Selecting the video ➞ Page 87
80

Audio Adjustments

The display for AUDIO MENU is the same regard-
less of which source you operate from.

Displaying the AUDIO MENU

1
Press the A.MENU (AUDIO) button in
each source display.
MENU is displayed.
2
Press 5 or ∞ to select "AUDIO", and
press the A.MENU (AUDIO) button.
The AUDIO MENU is displayed as follows:
FADER/BALANCE (fader/balance adjust-
ment)
EQUALIZER MENU (equalizer curve adjust-
ment)
BASS (bass)
TREBLE (treble)
LOUDNESS (loudness)
SUB WOOFER (subwoofer)
NON FADING (non fading)
HPF (HIGH PASS FILTER)
(High pass filter)
SLA (SOURCE LEVEL ADJUSTMENT)
(Source level adjustment)
You can operate a desired function. For
details, refer to the pages for each of the func-
tions.
"NON FADING" is only displayed when
"S.W. CONTROL:EXTERNAL" is set in the
INITIAL SETTINGS MENU. ("SUB
WOOFER" is not displayed.)
❒ When the subwoofer controller setting is
"S.W. CONTROL:INTERNAL" or "REAR
SPEAKER:SUBWOOFER", you can switch
the "SUB WOOFER". (Refer to page 85.)
❒ When the subwoofer controller setting is only
"S.W. CONTROL:EXTERNAL", you can
switch the non fading output on/off mode.
(Refer to page 85.)