Hitachi GR2000 Series Installation Manual page 98

GR2000 Installation Guide
Table 2-10 Specifications of Interface Cables and Connectors (continued)
25Mbps ATM NA25M-1*
OC-12c/STM-4 NAOC12-2M**
(ATM)MMF
OC-12c/STM-4 NAOC12-2S**
(ATM)SMF
* Used only in Japan.
** Pay attention to the tertiary group cable.
*** Connect NWVX-8 with the cables supplied separately. For details, refer to "Facility plan" and "Hardware
Operation Manual".
2.5.1.1 LAN
Illustrated below are the LAN interface cables and connectors. All these interface
cables are to be procured by the customer.
10BASE-T
Device
100BASE-TX
Device
100BASE-FX
Device
1000BASE-SX
Device
1000BASE-LX
Device
1000BASE-LH
Device
2-42
UTP category 3/4/5, 4-core/8-core, 2-pair
straight
Multimode optical fiber of 50/125 or 62.5/
125 m cre/clad
Single-mode optical fiber of 10/125 m
cre/clad
RJ-45
UTP category 3/4/5, 4-core, 2-pair straight
RJ-45
UTP category 5, 8-core, 4-pair straight
SC 2-core
Multimode or single-mode optical fiber of 1300 nm wavelength
SC 2-core
Multimode optical fiber of 850 or 1300 nm wavelength
SC 2-core
Multimode optical fiber of 850 nm wavelength or
single-mode optical fiber of 1300 nm wavelength
SC 2-core
Single-mode optical fiber of 1500 nm wavelength
-- 90 RJ-45
0.5 500 SC 2-core/1-core
0.5 1.5k SC 2-core/1-core
RJ-45
RJ-45
SC 2-core
SC 2-core
SC 2-core
SC 2-core
GR2K-GA-1002
Rev 6.03