Side-To-Side; Mower Deck Leveling - Craftsman PGT9500 107.289850 Quick Setup Manual

Mower Deck Leveling
(_ Place tractor hard level surface and
on
a
turn wheels straight
12-14 psi 10 psi
(0,82-0,96 bar) (0,68 bar)
®
Disengage mower blades.
®
Place mower deck
approximately in the middle
height of cut position.
Fully lower attachment lift.
Turn ignition OFF and remove
key.
Engage parking brake.
Check tires for the correct
pressures.
®
Disconnect spark plug wires
and place away from plugs.
SIDE-to-SIDE LEVELING
=
10.
Arrange the TWO REAR BLADES so they are
tool, measure the distance between the
outside tips of each blade and the ground.
The difference should be less than 1/8"
(3ram).
If necessary hold J-Hook (C) (pliers) and turn
the Iocknut (D) to raise or lower LEFT-HAND
SIDE of mower.
®
A
/
4