Connecting The Speakers; Connecting Atv And Additional Components - Philips LX-3000D Owner's Manual

Connecting the speakers
Conn cttllesuppied sp al<et syst msusngtb suppled
speal<etcables by m_ thing he colors of the jacks and
speal<etcables
Press up (or down) he speal<et'sjack and luly insert the
stripped portion of the speaker cable into the jack, then
fO ease,
Connect Lhe subwooleFs audio nput Lo the WOOFER
LINE OUT jack and the speakels as1olows :
Front Le_ (FL) black white
FrontRight(FR) black red
Center (C) black green
Surround Le_ (SL) black blue
SurroundRight(SR) black grey
Notes_
- Ensure that the speaker cables are correctly connected.
Improper connections may damage the system due to short-
circuit.
- For optimal sound performance, use the supplied speakers.
- Do not connect more than one speaker to any one pair of
+/-- speaker jacks.
- Do not connect speakerswith an impedance lower than
the speakers supplied. Pleaserefer to the SPECIFICATIONS
section of this manual,
Connecting aTV and
additional components
_u must conne_ a_! to the DVD system in order _ use
tl-,e DVD player You can connct otl-, r audio and aqdio/
vsual tampon nts o he DVD system in older o use he
Home Cinema Audio System's surround sound capablit es
IMPORTANT!
- There are various ways to connect the
system
to aTV (as shown in the illustration).You only
need to make one of the best connections,
depending on the capabilities of your TV system.
- Always refer to the instruction manual of the
connected equipment to make an optimal
connection.
- Some DVD discs have anti-copying devices, so
you will not able to record the disc through aVCR.
Use the suppled audio cables to connect AUDIO IN jacks
to the corresponding AUDIO OUT jacks on theTV, VCR or
other audio/visual components
Use he supplied Pr/Cr Pb/CbY cables to connect
Pr/Cr Pb/CbY jacks o the correspond ng video nput
jacks on aTV
IfyourTV is not equ pped with Pr/Cr Pb/CbY video nput
jacks,you can seect one of the following alternative
conP CLOPS :
Option 1
Conn CLthe S-VIDEO OUT jack to the S-Video it,put
jack or, Lhe-r_! us_/g a S Video cable (not supp ied)
Option 2
Connect the VIDEO OUT jack to the video input jack on
theTV usng a video cable (not supplied)
Use the AUDIO OUT jacks
_or connectn£ to an amplifier; audio system otTV with
analog audio nputs
to_ connect n£ to a CD or rape recorder to make an analog
record ng
Use the OPTICAL or COAXIAL jacks
tot connectng to arl amplifer with DTS, Dolby Dig ta}
decoder or CD recorden
You will ned to set the DVD system's digital output to
"ALE' (refer o"Preparations System setup (DVD}")
Notes:
- MP3 audio is not available on the digital output.
- Digital recording is only possible on a CD orVCD.
/
10 CONNECTIONS
pg 01-24/LX3xxx/37-Eng 10 4/16/02, 11:03 AM