Page 1: Table Of Contents
Safety Instructions .... Operating Instructions Care and Cleaning ....U.S. Models: Controls ......DSXH43 Features ......Loading and Using the Drger ..DPXH46 DH43 Installation Instructions ..9-20 Electrical Installation Canada Models: Electric Drger ....16, 17 DCXH46 Electrical Requirements ....
Page 2 IMPORTANT SAFETY INFORMATION. READALLINSTRUCTIONS BEFORE USING. WARNING! For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, personal injury, or death. • Do not store or use gasoline or other •...
Page 3 PROPER INSTALLAtiON This dryer must be properly installed and located in accordance with the Installation Instructions before it is used. Exhaus_/Ducting: [] Prol)erlx, ,gr(mnd drxer to conform _ith go_ erning codes ordinances. Follo_ derails ill Inst:dlation Instructions. This dr) er MUSTbe exhausted to the outside.
Page 4 iMPORTANT S AFETY iNFORMATiON. READ ALLiNSTRUCTIONS BEFORE U SING. WARNING! YOUfl L AUNOflY AflEA • Keep tile area underneath and around ",'our • Close supervision is necessary if this appliance bv or near used children. Do not allow children appliances fl'ee of coml_ustible materials, such...
Page 5 WARNING! • Never attempt to operate this appliance • You may wish to soften your la undered tiff)tics it is dmnaged, malflmcfioning, partially or reduce the static electricity in them by using disassembled or has missing or broken parts, a d_Te>applied riO)tic softener or an antistatic condifione_:...
Page 6 K_rrs / DEIJCATES _D._, iliU _ ... _!_i! _, ._._. ;} _ssoeY _ %i! !!i!!ili_ i,_ssORv TIMED DRy • DELICATES Models DSXH43, DH43 and PSXH43 FABRIC CARE CYCE SIGNAL START ,o_°7 TIMED PERM_ESS _TS/DWC_ES ili i i.o., co_o,s Features and appearance may vary.
Page 7: Features
About your dryer features. Cycle Signal Option (on some models) CYCLE SIGNAL five When tile signal is on it will sound just I/lillt/tes ;i reI//isl(lel" reI//(sve before the end of the cycle to remind the load. LOUD you to remove tile clothes.
Page 8 Loadingand using thedryer. Always follow the fabric manufacturer's care label when laundering. Sortingand LoadingHints _s a general rule, if clothes are soiled properly fi)r tlle washe_; they are sol_ed pr()perly tor tlle (hyel; Do not add fabn_softener sheea once the load has become warm Theymay causefabn_ softener stalbs Bounce_'Fabn_ConditionerDryerSheets have been approvedfor use ib aft GEDryerswhen usedib accordance with the manufacturer# /bstructions.
Page 9: Dpxh46
SpacemakerDryer Installation Models DCXH46 Instructions DSXH43 DPXH46 DH43 PSXH43 I ff youhaveany questions, i n the U.S.,call 800. G E. C ARES(800.432.2737) orvisitonrWeh s ite In Canada,carl 1.800.361.3400 orvisitonr Wehsite at:geappliances.ca ge.com FOR YOUR SAFETY: BEFORE YOU BEGIN ./k WARNING...
Page 10 Installation Instructions PREPARING THE INSTALLATION SITE TOOLS AND MATERIALS AND UNPACKING YOUR DRYER YOU WILL NEED Prepare tile area and exhaust fi)r installation ]° [] Phillips head screwdriver of tile ne',_ (h3el= [] Ac!justable plie_5 (at!just leveling legs) Check to be sm'e that the existing external [] Caq_enter's level...
Page 11 Installation Instructions Read these instructions completely and carefully. ELECTRICAL CONNECTION ELECTRICAL CONNECTION INFORMATION INFORMATION FOR GAS DRYERS ELECTRIC DRYERS A_ WARNING - T,,_ed.ce t he_sk.f A_ WARNING - T,,reduce t herisk of fire, electric shock or personal injury: fire, electric shock or personal iIIjtu3:...
Page 12 Installation Instructions EXHAUST SYSTEM _/kWARNING REQUIREMENTS The dryer MUST NOT be exhausted into a chinmey, a wall, a ceiling, a commou duct with a kitchen exhaust Use only 4" (10.2 cm) dJmneter (minimum) rigid metaJ any concealed space of a building which can accumulate duct for best performm_ce, or flexible metal duct, and...
Page 13: Gas Supplg Requirements
No. 14-All 18 a nd a dgid metal 4" 90-degree elbow. The kit extend into the duct. They will serve as collection points is a\:lilable through your GE retailei; Follow the fin" lint. instructions supplied with the kit. " Insulation...
Page 14: Location Of Your Drger
If an undercounter* installation is desired, tile dryer MUST have a top sheet kit installed, Pub. No. 14-A008. I¢dt is a\:filable through your GE retaile_: *Custom-sized countertop is required. Installation in Recess or Closet: 1. This dryer MUST be exhausted outdo(n_.
Page 15: Mobile Home Installation
Installation Instructions MOBILE HOME INSTALLATION ROUGH-IN DIMENSIONS 1, Dryer MUST be exhausted outside (outdoing, 267/8" _1 beneath the mobile home) using metal ducting that will (68.3 cm) not support combustion. Metal ducting must be 4" (l 0.l 6 cm) in diamemr with no obstructions.
Page 16 Installation Instructions ELECTRICAL INSTALLATION GROUNDING REQUIREMENTS ELECTRIC DRYERS WARNING: mp,,,pe, .,..ecti,,. , ,fthe ik WARNING: Thef.ll,,wi.g eqtfipment-grounding conductor can result in a risk _ff electric shock. Check Mth a licensed electrician if you are in requirements for proper and sate electrical installation doubt as to whether the appliance...
Page 17 Installation Instructions 3-WIRE SYSTEM 4-WIRE SYSTEM ELECTRIC DRYERS ELECTRIC DRYERS for use in Canada. Effective Jaamaacy 1, 1996: National Electrical Code DO NOT use for Mobile Home Installations, requires that construction (non e_sting) utilize 4-wire connection to an electric (h_e_: NOT for use on new construction.
Page 18: Gas Connection For Gas Drger
Installation Instructions GAS CONNECTION ./k CAUTION: Before operating tile dI)'eI; GAS DRYERS make sure tile drxer area is clear and fl'ee from combustible materials, gasoline, and other flanmmble 1. I{emove tile shipping cap flxm_ gas pipe at tile rear ot wq)ot_.
Page 19: Stacking Instructions
Stacking Instructions MOUNTING THE DRYER TO WARNING: THE WASHER • To reduce the risk of electric shock, disconnect this appliance ti'om the power supply befin'e attempting The numbers in the illustration correspond to steps. any user maintenance. Turning tile controls to tile 1.
Page 20: Reversing The Door Swing
Stacking Instructions-Reversing Door Swing Insert the 2 long screws provided in the kit through Thenumbers in the illustration correspond to steps. the holes in the dryer ti'ont panel and install into the fl'ont mounting brackets. Using the blade end ofa putb' knite co',ered with masking tape, carefllll)
Page 21: Troubleshooting Tips
(like chenille) from lint collectors (like corduroy). Static dectricity can atlract lint • See suggestions in this section uudel" STATIC. Overloading • Sel)al'ate Slualler ()lies. lal'ge loads iuto Paper, tissue, etc., left in pockets • EmpF all pockets bet0re laundering clothes.
Page 22 (generally, to dry a well-sorted washer load is a well-sorted dryer load). Large loads of heavy fabrics (like • lm'ge heavv thbrics contain more moisture mad take beach towels) hmger to dl y. Separate large, hea\_' tid_fics into...
Page 23 Notes.
Page 24: Warrantg For U.s. Customers
USA. If the product is located in an area where service by a GEAuthorized Servicer is not available, you may be responsible for a trip charge or you may be required to bring the product to an Authorized GE Service location for service.
Page 25: Warrants For Canadian Customers
Anypart ot the dryer which tails due to a defect in materials or workmanship, During this Fromthe date of the limited one-year warranty, GE will also provide, free of charge, all labor and related service origina!purchase costs to replace defective part.
Page 26: Consumersupport
Camco service (entel. or call 1.888.261.3055. ContactUs go.cam In tile U.S.: If you are not satisfied with tile service you receive Dora GE, contact us on our Website with all tile details including your phone numbe_; or write to: General Manage_;...

This manual is also suitable for:

Spacemaker dpxh46 Spacemaker dh43 Spacemaker psxh43 Spacemaker dcxh46

GE Spacemaker DSXH43 Owner's Manual And Installation Instructions

Quick Links

Related Manuals for GE Spacemaker DSXH43

Summary of Contents for GE Spacemaker DSXH43

This manual is also suitable for:

Table of Contents