Adjusting The Mower Deck; Leveling Deck - Husqvarna RZ 3016 Operator's Manual

Adjusting the Mower Deck

WARNING!
Before performing any service or adjustment checklist:
1. Engage the parking brake.
2. Place the Blade switch in the disengaged position.
3. Turn ignition switch to "OFF" position and remove the key.
4. Make sure the blades and all moving parts have completely stopped.
5. Disconnect the spark plug wire from all spark plugs and place the wire where it cannot
come in contact with the plug.
WARNING!
Blades are sharp. Protect your hands
with gloves and/or wrap blades with a
heavy cloth when handling.
Check the tire pressure before adjustment of the
mower deck. See "Checking tire Pressure" in
Maintenance section. Faulty mower deck adjustments
will cause an uneven mowing result.

Leveling deck

1. Position the mower on a level, preferably concrete,
surface.
2. Check the pressure in all four tires. See "technical
Data" section.
3. Rotate blade to align side to side.
4. turn front adjuster nut(s) to level deck side to side.
IMPORTANT INFORMATION
This procedure will place the mower in a base
measurement position. Additional adjustment
may be required to achieve desired cut for the
type of grass or conditions involved.
40 - HUSQVARNA
MAINtENANCE
Side to side adjuster nut
8050-015