LOOSE PARTS
The following items are included with your tool:
Oscillating Edge Belt/Spindle Sander (1)
Throat Plates (4)
Switch Key
Hex Keys ()
Knob
Rubber Feet (4)
throat Plates
WARNING:
The use of attachments or accessories not listed might be hazardous and could cause serious
personal injury.
ASSEMBLY
UNPACKING
This product requires assembly.
Carefully lift sander from the carton by the base, and
place it on a level work surface.
NOTE: This tool is heavy. To avoid back injury, lift with
your legs, not your back, and get help when needed.
Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the tool.
If any parts are damaged or missing, please call
1-866-539-1710 for assistance.
switCh key
sandinG sleeves
table insert
knob
sandinG belt
assembly
1/2 in.
Flat Washers (4),1-3/4 in. O.D., 7/8 in. O.D.,
5/8 in. O.D., 1/ in. I.D.
Sanding Sleeves (5)
Sanding Drums (4)
Sanding Belt Assembly
Table Insert
Operator's Manual
rubber feet
1-3/4 in. o.d.
7/8 in. o.d.
washer
washer
3/4 in.
1 in.
WARNING:
If any parts are missing, do not operate this tool
until the missing parts are replaced. Failure to do so
could result in possible serious personal injury.
WARNING:
Do not attempt to modify this tool or create acces-
sories not recommended for use with this tool. Any
such alteration or modification is misuse and could
result in a hazardous condition leading to possible
serious personal injury.
11
hex keys
5/8 in. o.d.
1/2 in. i.d.
washer
washer
sandinG drums
1-1/2 in.
2 in.
Fig. 4