Honda Accord Coupe Owner's Manual page 373

Lights
5. Insert the socket back into the
headlight assembly. Turn it
clockwise to lock it in place.
6. Turn on the lights to make sure
the new bulb is working.
7. Reinstall the inner fender cover.
Then reinstall the holding clips,
and lock them in place by pushing
on their centers.
370
Replacing Rear Bulbs
SCREW
1. Open the trunk.
Remove the screws in the center
of each of the two fasteners on the
side of the trunk lining. Pull the
lining back.
2. Determine which of the three
bulbs is burned out: stop/taillight,
back-up light or turn signal light.
2012 Accord Coupe
BULB
3. Remove the socket by turning it
one-quarter turn counterclockwise.
4. Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.
5. Insert the socket back into the
light assembly. Turn it clockwise
to lock it in place.
SOCKET