Table of Contents
Advertisement
supplies/tools
the majority of the wooden components in this kit
are fully machined at the factory and are ready for
assembly. a small amount of drilling, sanding,
and light machining will be required to complete
the ukulele.
recommended tools & supplies:
•
Wood glue
•
Finishing Supplies
•
Wood putty
•
rubber Bands
•
Sandpaper #180, #240, #320, and #600
•
Sanding Block
•
Masking tape
•
razor Blade
•
⁄
" or
⁄
" Chisel
1
1
4
2
•
Coat hanger
•
Clamps
•
Drill Bit Set
•
tack Cloth
•
Coping, Jig, or Scroll Saw (optional)
•
nippers or Fret Cutters
•
Straightedge (16" min.)
•
nioSh-approved respirator
•
anSi-approved Safety glasses
Model t10458 (Mfg. Since 10/11)
assembly
read this manual completely before starting the
construction process. this will familiarize you with
the parts of the ukulele used in construction, the
specific procedures you will perform, the tools
needed, and the time required.
During construction, we recommend trial-fitting
before gluing components together. this provides
the opportunity to fit items and correct any issues.
it also helps minimize the amount of clean up
necessary after gluing parts together. ALWAYS
let glue set for the manufacturer's recommended
time.
While this manual is meant to guide you through
the complete construction process, we recom-
mend that you refer to literature, expert advice,
and other resources for further information.
before starting
-5-
Advertisement
Table of Contents
