DOOR REVERSAL
1.
Unplug the power cord.
2.
Remove the two hinge
screws
from the door.
3.
Remove the door by
lifting it.
4.
Removethe two screws from
the lever-holderand then remove
the screw onthe opposite side
from the lever-holder.
5. Assemble the lever-hoEder using
the screwsthat were removed
from the lever-hoEder-in Step
4 and then fasten the screw
marked by the circle in the fi
gure to the opposite side from
the lever-holder.
6.
Remove the two screws
from the Frame-Front.
7.
Fasten the screw into the
hole on the other side.
8.
Remove the 2 Cushion-
Cover(F)s from the
bottom.
9.
Remove the 15 screws.
10. Remove the Holder-Glass.
t 1. Turn the Holder-Glass
upside
down and remove
the 8 screws.
t2. Remove
2 Support-
Hinges and the Hinge-
Door
t3. Remove the screw, insert
the removed
screw
into
the bottom
hole, and then
fasten it.
t4. Assemble
the Support-
Hinges and the Hinge-
Door that you removed
in
Step 12.
t5. Fasten the 8 screws that
you removed
in Step 11.
t6. Install 2 Guide-Holder
Glasses
onto the other
side.
t 7. Assemble the Holder-Glass
by sliding it so that the
upper hook is caught and
fasten the 15 screws that
you removed in Step 9.
, , _ T2-_
I
i
Contents 23
DV5471AE-03022A-01
EN.indd
Sec2:23
2011-03-28
3:44:42
I