Viewing Closed Captions (On-Screen Text Messages) -Analog - Samsung PN50A400C2DXZA User Manual

Viewing Closed Captions (On-Screen Text Messages) -Analog
The Analog Caption function operates in either analog TV channel mode or when a signal is supplied from an
external device. (Depending on the broadcasting signal, the Analog Caption function may operate on digital
channels.)
1 Press the MENU button to display the menu.
Press the A or _' button to select Setup, then press the ENTER button.
2 Press the A or _' button to select Caption, then press the ENTER button.
3 Press the ENTER button to select Caption,
Press the A or _' button to select On, then press the ENTER button.
Press the A or T button to select Caption Mode, then press the ENTER
button. Press the A or T button to select submenu (Default, CCl ~CC4 or
Textl~Text4) you want, then press the ENTER button.
Press the EXIT button to exit.
o__
• The default is Default.
- COl: The PrimarySynchronousCaptionService. Theseare captions in the
primarylanguagethat must be insync with the sound, preferablymatchedto a
specificframe.
= 0C2: The SpecialNon-SynchronousUseCaptions.Thischannel carriesdata that
is intendedto augment informationcarried in the program.
- CC3: SecondarySynchronousCaption Service.
Alternate program-relatedcaption data, typicallysecond languagecaptions.
= 0C4: SpecialNon-SynchronousUseCaptions.Similar to CC2.
• Text1: FirstTextService. This may be various non-programrelateddata
= Text2: SecondText Service.Additional data. usually not program related.
,, Text3/Text4: T hird and Fourth TextServices.These datachannels should be
usedonly if Text1and Text2are not sufficient.
• The Caption feature doesn't work in COMPONENT, PC, HDMI(DVI)
modes.
• The availability of captions depends on the program being broadcast.
You can also press the CO button on the remote control to select Captions
On or Off.
i............................... i