Table of Contents
Advertisement
Connecting VHF andUHF Antennas
_f you do
not have
a cable
system,
you
wilt need
to connect
an antenna
to your
TV.
Antennas with 300-ohm Flat Twin Leads
_f your antenna looks like this:
it has 300-ohm
flat
twin
leads
Place
[he wires
from
the twin
leads
under
[he Screws
on
[he
300-75
ohm
adapter.
Use a
screwdriver
to tighten
the
screws.
Plug the adapter
into the
Eli!
ANT-A
terminal
on the back
panel
of the TV
Antennas with 75.ohm RoundLeads
_f your
antenna
looks
like this:
_
it is an antenna
with
75-ohm
round
leads
Plug the antenna
lead
into
the
ANT-A
terminal
on the back
panet
of the TV.
Separate VHF and UtlF Antennas
if you have two separate antennas for your TV (one VHF and one UHF), you must combine the
two antenna signals before connecting
them to the TV. This requires a combiner
attachment, which
you can buy at an electronics store.
Connect both antenna
{eads to the combiner.
_.
Plug the combiner
into the
ANT-A
terminal
on the
back
panel
of the TV.
Advertisement
Table of Contents
