Expanding The Player's Storage; Preparing Microsd Or "Tf" Cards For Use - Ematic E5 Series User Manual

3. Run Windows Media Player and then click the tiny down arrow on the
Sync tab.
4. Click USB DISK DEVICE and then Set Up Sync on the submenu.
5. If you want Windows to automatically sync your player, then select
Sync this device automatically, otherwise clear the box, and click
Finish.
6. Highlight the files you want transferred to your device and drag them
into the Sync List column.
7. Click Start Sync to transfer the files. When the process is complete,
the you should be able to see the song files on the player through My
Computer.
Note: See the full list of supported formats under "Technical
Specifications" on pg. 29 to determine which synced songs will be
supported by the player.

5.0 Expanding the Player's Storage

5.1 Preparing MicroSD or "TF" Cards for Use

You can expand the player's capacity by adding a MicroSD card (also
known as a TransFlash or TF card) with a capacity of up to 8GB. First,
however, it must be prepared for use by the player. Follow these
instructions to prepare the card:
1. Turn the player off.
2. Insert a microSD/TF card into the player.
3. Turn on the player.
4. Select Setting from the Mode Selector.
5. Select Player Configure from the menu.
6. Select Format Card from the next menu. The
function will create the necessary folders.
7. Use the USB cable to connect the player to your computer.
8. Access your MicroSD card through My Computer.
When in Video, Camera, and other modes, you can access files on your
microSD card via the Dir List menu option.
E5 Series User Manual Page 9 of 33