Connecting And Charging The Player; Connecting And Disconnecting The Player From Your Computer; Charging The Battery - Ematic E6 Series User Manual

2.0 Connecting and Charging the Player

2.1

Connecting and Disconnecting the Player from Your Computer

To connect your player to your computer:
1. Turn the player ON.
2. Insert the small end of the included USB cable into the player.
3. Insert the large end into the computer's USB port.
The first time you connect the player to your computer; the computer will
automatically detect it and install any necessary drivers.
To safely remove the player from your computer:
1. Click the green arrow in the system tray (the area by the clock on your
task bar).
2. A list of attached USB devices will be displayed. Highlight the player in the
list.
3. If asked, click STOP. Windows will display a message when it is safe to
remove the player.
WARNING: Any USB device that stores data (e.g. flash drives, cameras, and media
players) should always be disconnected from your computer using this method to
avoid c orrupting the s tored d ata.
2.2

Charging the Battery

The player's battery is recharged while the player is connected to a running
computer.
To charge the battery, please follow these steps:
1. Connect the smaller end of the USB cable into the USB port of the player.
2. Connect the bigger end of the USB cable into an available USB port on
the computer.
3. The computer must be on for most USB ports to charge your battery. You
will not be able to play your device while connected to the computer.
4. To stop charging, simply disconnect the device.
E6 Series User Manual
Page 4