Vcr Operation - Yamaha DVX-S120 Owner's Manual

When the Remote Control's TV orVCR
button does not work even after setting the
device manufacturer code
Try again from step 1 and keep the following points in
mind.
• Make sure you select the Remote Control's TV or VCR
button correctly when setting the narnufaeturer code.
• ff there are multiple manuf_ctur_ codes enter them in
order.
• A_er rein_,i'thlg batteries, try file steps again (within 2
nfinules of"reinserting).
(When rc/lnsei'dng battc_es be careful not to press the
Re, note Control buttons. If a m_nu_eturer code h as bcga
set for file TV or VCR button, it may get deleted.)
To return to the factory default settings
While pressing SHIFT down as in step 2 Setting file
Manufaetttrer Code, entcx 299 for TV or 399 for VCR.
(Step 3 is not necessary.)
Maintaining manufacturer code settings
Replace battc_ es Ix_ fo_e they Ix_comc unltsable. When the
batteries wear out and yo_t remove them, the custom
manufaetttrcs code sc_ing will stay in memory for about 2
minutes. Be eare_] beeaus_ if more than 2 nfinutas elapse
the codes may be deleted. Also, at this dane, be careful not
to accidentally press a Remote Con_ol button, This can
dcac_ file codes.
While you set the manufacturer code for the "IV or VCFI button, you can use
the following functions after you press the TV or VCFI button.
VCR operation
-- .1 TV F'OWER
*_TV Chamaet S_ection (=)
*_TV Chamaet S_ection ( )
Re_td
V'td_ (._anel SelocOoz ( )
*_Whilc_you 8c-_ the TV _slufaClOrCvt co4e for thc_TV butlon, you canop_al_ year lclevision.
84