Yamaha RX-V571 Owner's Manual page 54

4
Select the Bluetooth wireless audio receiver from
the Bluetooth device list, and then enter a pass key
"0000."
When the pairing is completed, "Completed" appears.
3
Press the cursor keys (A/v) repeatedly to select
"Connect," and then press ENTER.
When the wireless connection is completed, "BT connected"
appears.
Cursor keys
ENTER
5
• Depending on Bluetooth devices, "BT connected" appears after pairing. In
this case, at the same time with pairing, wired connection is also completed.
Therefore, only by starting playback with the Bluetooth device, audio output
from the unit automatically.
Press OPTION to close the menu.
Playing back songs by connecting to the
Bluetooth device
When pairing is completed, perform the wireless connection
between the Bluetooth device and the Bluetooth wireless audio
receiver. While connecting, when playback is started with the
Bluetooth device, audio is output from the unit.
• Depending on the Bluetooth device, a wireless connection is established
automatically by controlling the Bluetooth device. In this case, following steps from
2-3 is unnecessary.
Press DOCK to select "DOCK" as the input source.
2 Press OPTION.
4
• When some Bluetooth devices are paired with the Bluetooth wireless audio
receiver, the Bluetooth device, which has the Bluetooth function enabled and
was connected most recently, is automatically connected to the Bluetooth
wireless audio receiver. When the device wireless audio receiver is
connected to another device, disable the Bluetooth function of the device or
connect them by operating Bluetooth device.
• "Not found" appears when the wireless connection is not established.
Confirm the following, and then retry the connection.
- Both the Bluetooth device and the Bluetooth wireless audio receiver are
paired.
- The Bluetooth device is turned on, and the Bluetooth function of that device
is set to enable.
- The Bluetooth device is within 10 m (32 ft.) from the Bluetooth wireless audio
receiver.
Play back songs with the Bluetooth device.
• Select "Disconnect" in step 3 to disconnect the wireless connection.
En
54