Page 1
BarkLimiter Series ™ Owner’s Manual May 2013 190-01554-00_0C Printed in Taiwan...
Page 2
All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements.
After the status LED turns solid green, remove the charging Mode and intensity dial clip from the collar. Status LED Charging clip contacts (BarkLimiter Deluxe model only) Turning On the Dog Collar Device Rotate the dial away from N. Attaching the Dog Collar Device to the Collar There is a 30-second delay before the device becomes active.
Fitting the Collar on Your Dog A higher number indicates a higher intensity level. Vibration CAUTION The device can use a short vibration to correct the dog. When To prevent irritation from the contact points, remove the collar using vibration, no electrical stimulation is used. for at least eight hours out of every 24-hour period.
Battery range Polarity indicators Water resistance IPX7 Replacing the BarkLimiter Battery BarkLimiter Deluxe Specifications Before you replace the battery, you must remove all dirt, water, and debris from the device. You also need a small Phillips Battery type Rechargeable, replaceable lithium-ion screwdriver.
You can find more information about this product on the Garmin ® website. • Go to www.garmin.com/outdoor. • Go to www.garmin.com/learningcenter. • Go to http://buy.garmin.com, or contact your Garmin dealer for information about optional accessories and replacement parts. Registering Your Device Help us better support you by completing our online registration today.