Table of Contents
Advertisement
Recording
Broadcast
Stereo TV or SAP
(Second
Audio Program)
Some TV programs are broadcast with stereo audio or SAP
(Second Audio Program).
1.
Turn on the TV and tune it to the VCR viewing
channel
(either 3, 4, or TV's video input).
,
3.
Insert a tape with safety tab in place.
If your VCR viewing
channel
is 3 or 4, make sure the VCR
indicator
appears in the VCR's display panel. If not, press
TVoVCR to turn it on.
4.
Use the SPEED button on the remote to select a recording
speed. The tape speed indicator
appears on the TV screen.
5.
Select the channel or line input to be recorded.
6.
Set the Reception: STEREO/MONO/SAP
feature for the type
of audio you want to record. See Other Features section.
AUDIO
I
Reception:
STEREO
2
Tape
Playback:
HI-FI
0
Exit
7. Press RECORD
to start recording.
8. Press STOP when you arefinished.
Recording
Audio
Only
You can record audio only from another
audio source connected
to the AUDIO IN (R and L/MONO) jacks on the back of the VCR.
,
Press the INPUT button on the remote to select the line
input.
The VCR will record audio from the audio equipment
connected
to the AUDIO IN jacks (see page 49 for more
information)
2.
Use SPEED on the remote to select the recording
speed.
3.
Start audio source playing
and press RECORD to begin
recording.
4.
Press STOP when you are finished.
[
Recording audio only will erase
anything that was previously
recorded on the tape.
Audio Connection
BACK of VCR
R
AUDEO
L
VIDEO
o0_ @-- @--@
M_No
i ,
BACK
of AMPLIFIER
/ RECEIVER
kN FROM
O
ANTENNA
VHFIUHF
OUT
TO TV
k_J
3CH4
]
25
Advertisement
Table of Contents
