Index Search; Zero Search - GE VG4270 User Manual

Index Search
The VCR has a "VHS Index Search System" that automatically
records an index mark on the tape every time you start a
recording.
During playback you can locate the program you want to play
by the number of index marks or by scanning. The VCR will
search forward or reverse from the location you are on the tape,
To Search:
.
2.
,
Press STOR
Press SEARCH on the remote to display the INDEX
SEARCH on-screen display.
If you want to search through a certain number of
index marks, press two number buttons to enter the
number of marks you want to search. Press CLEAR on
the remote to correct an entry.
4. Press FORWARD to search forward or REVERSE to search
in reverse. The VCR will locate your index mark and
begin playback. If you did not enter a specific index
number, the VCR will locate the next index mark and
begin playback.
5. Press STOPto end index searching.
Some index marks may be missed by the VCR:
• A mark too close to your location on the tape
• The mark at the beginning of a recorded segment of
five minutes or less
• The first index mark on the tape when you start at the
beginning of the tape
Zero Search
The zero search feature enables the VCR to quickly return to a
counter reading of 0:00:00 anywhere on the tape, This is
especially convenient when you want to repeat a segment of the
tape several times.
1. Go to the beginning of the program you wish to return
to.
(Continued on next page)
INDEX
SEARCH
Press REV OR FWD
to begin scanning
OR
enter a specific
index number
Press SEARCH to exit
INDEX SEARCH
Searching for
index number 12...
Press STOP to cancel
INDEX SEARCH
Searching for
index marks...
Press
STOP
to cancel
33