I Operating p eripheral equipment using
Programming the remote control code
remote controlI
You can operate other manufacturers' components using this TV's remote control.
Preparation:
• Connect the plug of the external component to the well outlet.
• Make sure the component is turned off.
1
POWER
Press and hold POWER and OK together, for at
least 5 seconds.
• The mode selection buttons flashes, and then
release the POWER and OK.
2
Select the type of the component.
_
_
_
• The selected button light and all others go out.
3
Enter the 3-digit infrared code (see pages 6062).
• Factory default setting : Panasonic
• Press POWER to test the operation.
Notes:
• If the component does not operate with the Remote Control, repeat the procedure
using another code. (Some brands have multiple codes).
• If an incorrect code is entered, or if the procedure takes longer than 30 seconds,the
programming will fail.
To find
the code
not listed
in the
index
1
After selecting the type of component (step 2, above)
--
Press to select the code.
• The code starts from the current device.
• Press POWER button to test the operation.
• Repeat the steps until the component code is found. It
may take many attempts
before the correct code is
found.
2
Press to store the code.
59