Programming The Remote; Programming Without A Code; Component Codes - Panasonic CT-G2973 Manual
Hide thumbs
Also See for CT-G2973:
- Operating manual (73 pages) ,
- Operating instructions manual (72 pages)
Table of Contents
Advertisement
Available languages
Available languages
REMOTE CONTROL OPERATION
Programming
The Remote
The Universal
Remote
Control can be programmed
to
operate
many
manufacturers'
components,
using
the
component
function
buttons
for VCR,
DVD, CABLE
or
DBS. Follow the procedures for programming your Remote
Control with or without a code for the component.
Note:
Determine the manufacturer
of the component
and look
in the table for the code (found an page 9).
Procedure
Confirm
that the external
component
is plugged
and
operating.
Turn the component off.
ACTION
0
Press
and
together, for
at least 5
seconds.
Press appropriate component
button on the Remote
Control VCR, DVD, CABLE or DBS.
Enter the 3-digit component
code using the Remote
Control numeric keypad (0 ~ 9 buttons).
Press
the
Remote
Control
_
to
test
the
component.
If
the
procedure
was
successful,
the
component will turn on.
Note:
If the component
does not operate
with the Remote
Control,
repeat
the procedure
using
another
code.
(Some brands have multiple codes). If an incorrect code
is entered,
or if the procedure
takes longer
than 30
seconds, the programming
will fail.
Programming
Without
A Code
This
procedure
searches
all
codes
and
is called
the
"sequence
method."
Confirm that the external component
is plugged in
and on.
Turn the component off.
A_ON and O
Press
together, for at least 5
seconds.
Press
appropriate
component
button
on the
Remote Control
Press VOL •
to move forward to the next code.
Press • VOL to move backward.
Press the Remote Control
_
to test the
v
component.
If the procedure was successful,
the
component will turn on.
Note:
Repeat the above steps until the component
code is
found. It may take many attempts before the correct
code is found.
ACTION
After the code is found, press
to store the
code.
Component
Codes
The Universal
Remote
Control is capable
of operating
many component
brands
after entering
a code. Some
components
may not operate because the codes are not
available
due to limited memory. The Universal Remote
Control does not control all features found in each model.
VCR
CABLE
DVD
DBS
80
Hide quick links:
Advertisement
Chapters
Table of Contents
