Dell OptiPlex HUB Setup Manual

Setting Up Your Powered USB Hub
CAUTION:
Before you set up and operate your Dell hub, see the
safety instructions in the Product Information Guide
This placemat is only intended for quick reference.
Consult your Product Information Guide for complete details
1 2 3
1. Port LEDs (6)
2. Status LED
3. Host LED
4. Service Tag Label
1
3
1. USB Peripheral Ports (+12 V) (5)
2. USB Peripheral Port (+24 V)
3. USB Host Port
4. Power Switch
5. AC Power Port
6. AC Pass-Through Power Ports (2)
*0TF663A00*
0TF663A00
TM
4
1 Unpack your Powered USB Hub
2
(a)
4
5
6
3 If Integrator is used, install retainers (a) and hub (b)
NOTE: If Integrator is not used, place hub in secured
position
|
www.dell.com support.dell.com
(b)
1 - Dell Host PC and Integrator sold separately
(a)
(b)
1
2 If Integrator is used, remove cover from Integrator (a)
and slide tray out (b)
4 Connect AC power cord to hub and power outlet
Continued